Post your mCPx Pictures Here
 

I dont see a sticky so I thought I would make one.

Show off your stock, modded, or 3D flying mCPx.

So here we go





Alohas:Bang
Gill P

Stuck,
Rick

here is my little pride and joy:
http://www.helifreak.com/attachment....1&d=1311246945

http://www.helifreak.com/attachment....1&d=1311246945

just got mine yesterday!

Work in Progress
 

Attachment 244029Here is a shot of my BL chassis upgrade so far. It consists of the RKH CF frame, w/ boom supports, and mH CF skids. The CNC boom block has been removed, and replaced by my custom Delrin block, and Woven CF tube tailboom. Also the boom supports have been relocated to the mH skid attachment location, and are connected to the boom at the rear by a custom Delrin clamp.

I like your style, sir :thumbup: Waiting for the final version.
Here's mine in two most recent stages of tuning, more to come...

http://farm7.static.flickr.com/6132/...ea74fd8c_z.jpg

http://farm7.static.flickr.com/6121/...edef2f15_z.jpg

http://farm7.static.flickr.com/6026/...87d01521_z.jpg

Here's mine on Black Canopy. Stock except for some basic mods.



http://http://www.helifreak.com/atta...1&d=1312396754

My micro and a friend's unfinished maxi...

It's a Huey scale fuselage, supposed to get some Vario mechanics and run +1000mm blades once it will be finished. I simply found it amusing to put one of my mCPXs on top. :lol:

http://www.helifreak.com/attachment....1&d=1312397375

My BL MCP X with the SR 120 Tail motor. Flys great.

My white bird:
HP08 11800 KV 9T pinion
XP-12A
TheSteve
dual coreless tail mod

http://img837.imageshack.us/img837/6...htrev80002.jpg

http://img685.imageshack.us/img685/9...htrev80003.jpg

http://img600.imageshack.us/img600/5...htrev80004.jpg

http://img96.imageshack.us/img96/133...htrev80005.jpg


And my yellow one:
HP05s 13300KV 9T pinion
XP-7A
TheSteve
dual coreless tail mod

http://img708.imageshack.us/img708/7...pxyel80001.jpg

http://img809.imageshack.us/img809/2...pxyel80002.jpg

http://img804.imageshack.us/img804/8...pxyel80003.jpg

Super sweet.:clap Cant wait to get mine like that. I gotta wait on other projects and im waiting until a major component fails to actually upgrade it. All I have done so far is the canopy grommet mod.

Keep those pictures comming.:peace

http://www.helifreak.com/picture.php...ictureid=59382
http://www.helifreak.com/picture.php...ictureid=59383
http://www.helifreak.com/picture.php...ictureid=59384

http://www.helifreak.com/picture.php...ictureid=59397

Nuff Said:face

Where did you get the canopy?

I got the Black Canopy from MIA.

http://www.micro-flight.com/Blade%20mCPx.htm

FJ

How did you make those holes on the original fin?

With a very sharp hobby/exacto knife. It gives me better performance in the wind and better visual orientation than going finless.

yea but how so accurate?

Accurate? Thanks! I did it freehand. A lot of patience, slow careful work with the exacto knife and a good eye. The first cuts are shallow, not going through the plastic. Basically just scoring the surface at first. Then you go over the cut again going a little deeper each time. Make sure you have a piece of cardboard behind the fin or else you will cut into your table or work surface.

Ok thanks,does this gives anything except for beauty?