Originally Posted by skytrekin
Anyone have any experience with the sensor mode settings in the expert menus? The one that lists moderate, quick, and middle. Default is moderate.
Could this be that it controls response speed? The manual says it selects the response of the gyro sensor signal.
I have been having trouble getting the tail of my 600 pro to stop shaking after a control input. Stop boosting and stop delay haven't helped at all. Tail linkages are free, heli has about 10 flights on it. Tail gain set at 68%
I suspect that this will relate to filtering being done on the sensor signal. If so, this would be useful to address issues of vibration. As it works fine in "moderate" mode I suspect most folks won't have messed with it.
Trex 450SEv2/HS65-MGs cyclic/Spartan Quark/DS520 tail
Trex 450ProV2 DFC/CGY750 FBL/DS410s cyclic/DS520 tail
Trex 500ESP DFC/CGY750 FBL/YGE-120LV ESC/DS510s cyclic/DS650 tail
Walkera QR X350 Pro with FatShark 250mW VTX, Futaba 8FG 2.4GHz