HeliFreak - View Single Post

TDubya · 02-24-2012, 07:11 PM

The other day I got my cx3's out to tinker with and took the time to install a Blade 400 landing skid on one of them because the stock landing gear are total crap IMO... I had to elongate the mounting holes in the skids to get them to match up to the stock battery box and used slightly longer screws since the skid is a little thicker. I also had to trim the body as well to clear the skids but it was no big deal. I know it looks a little large but with these skids even rough landings are smooth. I may trim down the Tubes a bit when I have some time. Great deal for 8 bucks in my opinion.

02-24-2012, 07:11 PM	#1
TDubya Registered Users My HF Map location Join Date: Nov 2009 Location: Lubbock TX	CX 3 landing skid upgrade. The other day I got my cx3's out to tinker with and took the time to install a Blade 400 landing skid on one of them because the stock landing gear are total crap IMO... I had to elongate the mounting holes in the skids to get them to match up to the stock battery box and used slightly longer screws since the skid is a little thicker. I also had to trim the body as well to clear the skids but it was no big deal. I know it looks a little large but with these skids even rough landings are smooth. I may trim down the Tubes a bit when I have some time. Great deal for 8 bucks in my opinion. Attached Thumbnails __________________ ,SR ,mCPx, Trex 450 Pro, Sport, and SE V2, Pair of Trex 600esp's.DX7 & Dx6i. My head is set up proper. I have seen all of the videos.