View Single Post
Old 09-05-2012, 05:54 PM   #50
CX2Pilot
Forum Support
 
Posts: 693
Thread Starter Thread Starter
 

Join Date: Jun 2008
Location: Cleveland, Ohio
Default Setup for the Walkera Master CP

18. How to setup the TX for the Walkera Master CP for the RX2637H-D Receiver - Devo Transmitter.

Walkera recommended using their downloaded minicp.bin as a starting point for the Master.
Their settings are very similar.

You can use the settings here which are from the user manual or you can use my settings for the Mini CP.

http://helifreak.com/showthread.php?t=400204





Devo 6/7/8S/10/12S


Type- Helicopter


SWASH - 1 Servo Normal


STMOD - MODE2 if you want the throttle on the left stick


REVERS - Set all to normal



Device Output

Devo 6


Gear - GEAR SW - GYRO
Pitch - System - Active



Devo 7

Gear - GEAR - ACT
AUX2 - AUX2 - GYRO



Devo 7E

Gear- HOLD SW
Function - Active

AUX2 - FMOD SW
Function - Gyro



Devo 8S

Gear - GEAR SW - Active

Pitch - System - Active

AUX2 - FMOD SW - Gyro

AUX3 - RUDD D/R - Active



Devo 10

Gear - GEAR SW - Active

AUX2 - FMOD SW - Gyro

AUX3 - RUDD D/R - Active

AUX4 - AUX4 KB - Active

AUX5 - AUX5 KB - Active



Devo 12S

Gear - GEAR SW - Active

Pitch - System - Active

AUX2 - AUX2 Lever - Gyro

AUX3 - AUX3 Lever - Active

AUX4 - AUX4 Lever - Active

AUX5 - AUX5 Lever - Active

AUX6 - AUX6 Knob - Active

AUX7 - AUX7 Knob - Active



Gyro Sensor - (Devo 7E)

Mode - Manual

Switch - HOLD SW

Pos 0 = 75.0%

Pos 1 = 50.0%



Gyro Sensor - (Devo 6, Devo 7, Devo 8S, Devo 10, and Devo 12S)

Mode - Manual

Switch - Mix SW

Pos 0 = 75.0%

Pos 1 = 70.0%

Pos 2 = 50.0%



Throttle Curve

Normal Flight

L= 0%

M= 50%

H= 100%


Stunt 1

L= 100%

M= 75%

H= 100%


Stunt 2 - (There is no Stunt 2 for the Devo 7E TX)

L= 100%

M= 75%

H= 100%



Pitch Curve

Normal Flight

L= - 15%

M= + 25%

H= + 55%


Stunt 1

L= - 55%

M= 0%

H= + 55%


Stunt 2 - (There is no Stunt 2 for the Devo 7E TX)

L= - 55%

M= 0%

H= + 55%



-------------------



DR&EXP:

Set D/R and EXPO to your personal needs/preference. These should be good for beginners.
You can set more or less than 70% D/R if you want and more or less than +30% EXPO if you want.


ELEV D/R - 70% EXP +30%

AILE D/R - 70%, EXP +30%

RUDD D/R - 100%, EXP LIN



Tom
__________________
Moderator for the Blade and Walkera Forums.
Walkera V100D01 V2 DBL, Walkera 4G6 w/RX2610V2, Align T-Rex 450SE V2, Blade mCPX V1 BL, Walkera Mini CP BL, Walkera QR Ladybird, Walkera Hoten X, Walkera Master CP.

Last edited by CX2Pilot; 09-11-2012 at 04:34 PM..
CX2Pilot is offline        Reply With Quote