Build videos 600 Nitro - by Finless

Finless · 07-30-2007, 11:51 AM

Well, as promised I am posting a full build series of the 600N in my Tech room. This will be an end to end series and I will be covering everything. Yes some stuff will be a redo of steps that are common to the 600E but I will be going over things that have changed since I did the E version a year ago in those steps.

Also I will be showing some steps that John has covered in his videos as well.
My vids will be here:

http://www.helifreak.com/showthread.php?t=41514

John's vids are excellent too so I suggest watch his as well as it is always good to get another perspective. Also he covers some things that I wont be like clutch liner replacement, etc.
John's vids are here:

http://www.helifreak.com/showthread.php?t=36177

Bob

ozace · 07-30-2007, 06:01 PM

taking care of us again

hookmaker · 08-02-2007, 04:18 PM

Bob, can't get anything up on your thread??

/Henrik

Finless · 08-02-2007, 09:07 PM

I updated the above links as they did not work due to the migration to the new site.

Anyway they will now take you to the proper topics in my forum BUT.... Video downloads are now working yet. Stay tuned we will have them fixed soon.

Bob

Helipilot48 · 08-02-2007, 10:17 PM

why can't i download video???? It tell me to login but i already am so whats up with the new site????

Finless · 08-29-2007, 07:35 PM

NEW vids going up tonight!

Sorry for the long delay but it took me 2 weeks to catch up on work (real job) after IRCHA.

http://www.helifreak.com/showthread.php?t=41514

Bob

PacketSpike · 10-26-2007, 03:55 PM

To Whom may help:

I am building my first heli and its a TRex 600N Pro

The issue I have is that the M3 6mm set screw that locks down the FlyBar Paddle is too small for the hole in the paddle - Has anyone else had this issue?

I watched the Finless video on the step (AWESOME BY THE WAY FINLESS) and i have the right set screw, the hole is just too darn big.

Thank you in advance for your time and help.

PacketSpike

tomheli · 02-09-2008, 06:39 PM

send me a dvd i gave ray 30.00 4 1

tomheli · 02-09-2008, 06:36 PM

new - old i would to see them to see if i could do anything better never to old to learn , hard to belive my 600 could fly any better, but u never know always open to input

tomheli · 02-09-2008, 06:31 PM

6oo build vidios where ?

nbm · 10-29-2007, 02:26 AM

I had the same problem with the set screw holes being to large in the paddles. I purchased new paddles as i didn't know it was a widespread problem. as much as i spent on this heli another 6 dollars really wasn't going to matter.

Opie26047 · 01-18-2008, 05:12 PM

Where do I find your 600 nitro videos?
I used your 450 vid's a while back. they were great

Thanks
Rob

TheBum · 01-18-2008, 11:16 PM

They're in the same area as the T-Rex SE videos, under a thread labeled, strangely enough, "NEW - Trex600 Nitro Pro Build Vids". Here's a link to the thread:

http://www.helifreak.com/showthread.php?t=41514

Finless · 01-20-2008, 10:01 AM

Yes I guess they are not NEW anymore are they

Guess I will edit the title...

Thanks,
Bob

manike · 02-06-2008, 11:23 PM

Great videos again, thank you. I used your videos to build my 450 SE V2, and now I am using them again to build a 600N. Your work is very much appreciated.

crittters · 04-11-2008, 11:48 AM

Thanks for the build videos, just built a 600NSP and it lifted off with just a few ticks to trim on left cyclic.

Just plain AWESOME!

Keep up the good work.

Espeefan · 05-06-2008, 11:08 AM

Bob Finless, or anyone else that might know, I am on a dial-up connection. Would it be possible for me to purchase all these videos on a DVD or CD? I just bought my Align 600N and am a newbie. I'd love to watch the videos, but at this rate, it's going to take me sometime into next year to download all of them!

TheBum · 05-06-2008, 12:09 PM

Quote:

Originally Posted by Espeefan

Bob Finless, or anyone else that might know, I am on a dial-up connection. Would it be possible for me to purchase all these videos on a DVD or CD? I just bought my Align 600N and am a newbie. I'd love to watch the videos, but at this rate, it's going to take me sometime into next year to download all of them!

I could probably throw them on a DVD for you (or CD, if you prefer the WMV files) for the cost of the disc and shipping. If you don't get any better offers, PM me.

Finless · 05-06-2008, 02:55 PM

I am OK with anyone putting the vids on a CD / DVD to help those with dial up AS LONG as they make no profit.

Bob

TheBum · 05-06-2008, 03:11 PM

Quote:

Originally Posted by Finless

I am OK with anyone putting the vids on a CD / DVD to help those with dial up AS LONG as they make no profit.

I wouldn't dream of it. I feel like I'm in debt to the folks here for all the assistance over the last several months, so profiting from it would be *so* wrong. I should have thought to check with you first, though. My apologies.

07-30-2007, 11:51 AM	#1
Finless Team Taco VP My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Build videos 600 Nitro - by Finless Well, as promised I am posting a full build series of the 600N in my Tech room. This will be an end to end series and I will be covering everything. Yes some stuff will be a redo of steps that are common to the 600E but I will be going over things that have changed since I did the E version a year ago in those steps. Also I will be showing some steps that John has covered in his videos as well. My vids will be here: http://www.helifreak.com/showthread.php?t=41514 John's vids are excellent too so I suggest watch his as well as it is always good to get another perspective. Also he covers some things that I wont be like clutch liner replacement, etc. John's vids are here: http://www.helifreak.com/showthread.php?t=36177 Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* Last edited by Finless; 08-02-2007 at 09:07 PM..

07-30-2007, 06:01 PM	#2
ozace Registered Users Join Date: May 2006 Location: Melbourne, Australia	taking care of us again __________________ more than enough now

08-02-2007, 04:18 PM	#3
hookmaker Registered Users My HF Map location Join Date: Jun 2006 Location: Copenhagen, Denmark	Bob, can't get anything up on your thread?? /Henrik __________________ Hookmaker Kasama Srimok 90, Kasama Srimok 90E, JR Vibe 90 SG, JR Venture 90, JR Vibe 50 3D V-bar, Bergen Intrepid Gasser, Vision-SX 90 (x 2) MSH Protos "Monsterheli", HDX-450

08-02-2007, 09:07 PM	#4
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	I updated the above links as they did not work due to the migration to the new site. Anyway they will now take you to the proper topics in my forum BUT.... Video downloads are now working yet. Stay tuned we will have them fixed soon. Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

08-29-2007, 07:35 PM	#6
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	NEW vids going up tonight! Sorry for the long delay but it took me 2 weeks to catch up on work (real job) after IRCHA. http://www.helifreak.com/showthread.php?t=41514 Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

08-02-2007, 10:17 PM	#5
Helipilot48 Registered Users Join Date: Oct 2006 Location: Chula Vista,CA.	why can't i download video???? It tell me to login but i already am so whats up with the new site????

10-26-2007, 03:55 PM	#7
PacketSpike Registered Users My HF Map location Join Date: Oct 2007	To Whom may help: I am building my first heli and its a TRex 600N Pro The issue I have is that the M3 6mm set screw that locks down the FlyBar Paddle is too small for the hole in the paddle - Has anyone else had this issue? I watched the Finless video on the step (AWESOME BY THE WAY FINLESS) and i have the right set screw, the hole is just too darn big. Thank you in advance for your time and help. PacketSpike

02-09-2008, 06:39 PM	#8
tomheli Registered Users My HF Map location Join Date: Dec 2007	send me a dvd i gave ray 30.00 4 1

02-09-2008, 06:36 PM	#9
tomheli Registered Users My HF Map location Join Date: Dec 2007	new - old i would to see them to see if i could do anything better never to old to learn , hard to belive my 600 could fly any better, but u never know always open to input

02-09-2008, 06:31 PM	#10
tomheli Registered Users My HF Map location Join Date: Dec 2007	6oo build vidios where ?

10-29-2007, 02:26 AM	#11
nbm Registered Users Join Date: Sep 2007	I had the same problem with the set screw holes being to large in the paddles. I purchased new paddles as i didn't know it was a widespread problem. as much as i spent on this heli another 6 dollars really wasn't going to matter.

01-18-2008, 05:12 PM	#12
Opie26047 Registered Users Join Date: Jan 2008	Build video's Where do I find your 600 nitro videos? I used your 450 vid's a while back. they were great Thanks Rob

01-18-2008, 11:16 PM	#13
TheBum HF Support My HF Map location Join Date: Jul 2007 Location: McKinney, TX, USA, North America, Earth, Solar System, Milky Way, Universe	They're in the same area as the T-Rex SE videos, under a thread labeled, strangely enough, "NEW - Trex600 Nitro Pro Build Vids". Here's a link to the thread: http://www.helifreak.com/showthread.php?t=41514 __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Nankin Hobby Field Rep, Compass Support Team Helis: Compass Atom 500 (V-Bar), Compass Atom 6HV (V-Bar), Blade 130X, Blade mCPX Experience is something you obtain only after you need it. I wouldn't mind social media so much if it didn't involve people.

01-20-2008, 10:01 AM	#14
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Yes I guess they are not NEW anymore are they Guess I will edit the title... Thanks, Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

02-06-2008, 11:23 PM	#15
manike Registered Users My HF Map location Join Date: Jan 2008 Location: Sewell, NJ	Great videos again, thank you. I used your videos to build my 450 SE V2, and now I am using them again to build a 600N. Your work is very much appreciated.

04-11-2008, 11:48 AM	#16
crittters Registered Users Join Date: Oct 2007	Thanks for the build videos, just built a 600NSP and it lifted off with just a few ticks to trim on left cyclic. Just plain AWESOME! Keep up the good work.

05-06-2008, 11:08 AM	#17
Espeefan Registered Users Join Date: Mar 2006 Location: Wisconsin, USA	Bob Finless, or anyone else that might know, I am on a dial-up connection. Would it be possible for me to purchase all these videos on a DVD or CD? I just bought my Align 600N and am a newbie. I'd love to watch the videos, but at this rate, it's going to take me sometime into next year to download all of them! __________________ -Nathan- Align 600N Super Pro

05-06-2008, 02:55 PM	#19
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	I am OK with anyone putting the vids on a CD / DVD to help those with dial up AS LONG as they make no profit. Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode