DRIFTING

ChrisH · 05-19-2009, 10:50 PM

First thread

Ok who here also drifts RC cars? Post a picture of your car if you do.

I drift a Team Associated TC4 Team kit, using a Novak Velociti 5.5/GTB and HPI T-Drift tires.

sonofcar · 05-19-2009, 10:53 PM

that thing is look damn cool dude, how fast does it go?

ChrisH · 05-19-2009, 11:11 PM

Forwards or sideways?

Gorgin4325 · 05-20-2009, 01:41 AM

Thats looks so cool. I almost ordered an HPI nitro drift car a while back, but changed my mind a few days later sicne there are not many places I can drive it here...

Regards,
G

ChrisH · 05-20-2009, 01:43 AM

Electric is where it's at!

We have an indoor carpet drift track, it's really awesome. Nothing like tandem drifting with some of your buddies!

M.Huerta · 05-22-2009, 10:56 PM

hey trexflyer you want a losi jrx-s, i've got one begging for a new home!

ChrisH · 05-22-2009, 11:02 PM

Last time I had a Losi, it did not turn out well

M.Huerta · 05-22-2009, 11:13 PM

ha ha it seemed like my tc4 gave me TONS of problems

ChrisH · 05-22-2009, 11:51 PM

With what part of the car? I'm having a couple problems with the differentials on mine, but that's to be expected if they're plastic. I'll be buying the solid steel spools soon ...

M.Huerta · 05-23-2009, 01:05 AM

well i just noticed that you have the factory team kit and mine was the normal one, the biggest problems i had was the damn screw holes ALWAYS stripped out!

ha ha i was bored this evening and put a feigaou 3700 kv bl motor on my T4 stadium truck on 4s!!! and holy crap!! that thing is FAST, and the good think is that NOTHING is hot!

ChrisH · 05-23-2009, 11:13 AM

Mine isn't the Factory Team, the FT is the CF plate chassis one. This one is just the Team version with molded carbon and nylon components.

As for the screws, it's molded plastic, you have to be easy on them

M.Huerta · 05-23-2009, 12:46 PM

yeah i learned that the hard way

Mooshu Beef · 06-05-2009, 08:35 AM

Very nice. I used to own a TA-05 that I used to drift. However, the cost for upgrading at the time was too much for me so I sold it. I definitely loved it though--had the CC Mamba Max brushless system with 6900kV motor

.

Have you guys ever tried to race with your stick Tx's? I am going to need an On Road car soon, and I dunno if using it with my DX7 will be usable, really. I am just worried about the throttle since I wouldn't know how to program the brake?

francis111 · 06-28-2009, 10:13 PM

for sale TA03F Full bearings
full aluminum wheel assembly
pinions
pulley
light weight bar
New belt drive

10k only with all the packages and things i have.
Contact number 09167863158

ChrisH · 06-28-2009, 10:59 PM

For sale forum ... ?

05-19-2009, 10:50 PM	#1
ChrisH HF Support Join Date: Aug 2007 Location: CA	DRIFTING First thread Ok who here also drifts RC cars? Post a picture of your car if you do. I drift a Team Associated TC4 Team kit, using a Novak Velociti 5.5/GTB and HPI T-Drift tires. Attached Thumbnails __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-19-2009, 11:11 PM	#3
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	Forwards or sideways? __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-20-2009, 01:41 AM	#4
Gorgin4325 Registered Users My HF Map location Join Date: Aug 2005 Location: Florida	Thats looks so cool. I almost ordered an HPI nitro drift car a while back, but changed my mind a few days later sicne there are not many places I can drive it here... Regards, G __________________ "I'll be there when you fall" (Ground, 01/01/0001)

05-20-2009, 01:43 AM	#5
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	Electric is where it's at! We have an indoor carpet drift track, it's really awesome. Nothing like tandem drifting with some of your buddies! __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-22-2009, 10:56 PM	#6
M.Huerta Registered Users Join Date: Jun 2008 Location: Gilbert,AZ	hey trexflyer you want a losi jrx-s, i've got one begging for a new home! __________________ GAUI 425 - HK3026-1600, Phoenix 80, HS-5245MG's, GY520, DS20GMD, Hitec Optima 7 Rx.

05-19-2009, 10:53 PM	#2
sonofcar Registered Users My HF Map location Join Date: Dec 2007 Location: cali	that thing is look damn cool dude, how fast does it go?

05-22-2009, 11:02 PM	#7
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	Last time I had a Losi, it did not turn out well __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-22-2009, 11:13 PM	#8
M.Huerta Registered Users Join Date: Jun 2008 Location: Gilbert,AZ	ha ha it seemed like my tc4 gave me TONS of problems __________________ GAUI 425 - HK3026-1600, Phoenix 80, HS-5245MG's, GY520, DS20GMD, Hitec Optima 7 Rx.

05-22-2009, 11:51 PM	#9
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	With what part of the car? I'm having a couple problems with the differentials on mine, but that's to be expected if they're plastic. I'll be buying the solid steel spools soon ... __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-23-2009, 01:05 AM	#10
M.Huerta Registered Users Join Date: Jun 2008 Location: Gilbert,AZ	well i just noticed that you have the factory team kit and mine was the normal one, the biggest problems i had was the damn screw holes ALWAYS stripped out! ha ha i was bored this evening and put a feigaou 3700 kv bl motor on my T4 stadium truck on 4s!!! and holy crap!! that thing is FAST, and the good think is that NOTHING is hot! __________________ GAUI 425 - HK3026-1600, Phoenix 80, HS-5245MG's, GY520, DS20GMD, Hitec Optima 7 Rx.

05-23-2009, 11:13 AM	#11
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	Mine isn't the Factory Team, the FT is the CF plate chassis one. This one is just the Team version with molded carbon and nylon components. As for the screws, it's molded plastic, you have to be easy on them __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

05-23-2009, 12:46 PM	#12
M.Huerta Registered Users Join Date: Jun 2008 Location: Gilbert,AZ	yeah i learned that the hard way __________________ GAUI 425 - HK3026-1600, Phoenix 80, HS-5245MG's, GY520, DS20GMD, Hitec Optima 7 Rx.

06-05-2009, 08:35 AM	#13
Mooshu Beef Registered Users Join Date: Aug 2008 Location: State of Insanity	Very nice. I used to own a TA-05 that I used to drift. However, the cost for upgrading at the time was too much for me so I sold it. I definitely loved it though--had the CC Mamba Max brushless system with 6900kV motor . Have you guys ever tried to race with your stick Tx's? I am going to need an On Road car soon, and I dunno if using it with my DX7 will be usable, really. I am just worried about the throttle since I wouldn't know how to program the brake?

06-28-2009, 10:13 PM	#14
francis111 Registered Users Join Date: Jun 2009 Location: philippines	FOR SALE TA03F DRIFT SPEC for sale TA03F Full bearings full aluminum wheel assembly pinions pulley light weight bar New belt drive 10k only with all the packages and things i have. Contact number 09167863158

06-28-2009, 10:59 PM	#15
ChrisH HF Support Thread Starter Join Date: Aug 2007 Location: CA	For sale forum ... ? __________________ Edge Rotorblades Thor/Voltz Batteries 450 Pro V-Bar 130X

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode