4G3 Has No Pitch

bobrains · 01-10-2010, 07:25 PM

Been flying a Walkera CB100 for a while and moving up to a 4G3. Transmitter is a Walkera 2081Pro. Works fine with the CB100 in 2401 mode. With the 4G3 paired with the TX in 2081 mode I have no tail rotor, so I put it into 2601 mode and the tail rotor is working fine now. Problem is, I have zero pitch. In normal mode no positive pitch and in 3D mode no negative pitch. Throttles up fine, but the pitch never changes. Sure would appreciate any suggestions anyone might have. Thanks much.

Bob

Silverexpress01 · 01-11-2010, 08:51 AM

My prior reply was inaccurate - I've removed it.

Dusty1000 · 01-11-2010, 09:19 AM

Quote:

Originally Posted by bobrains

Been flying a Walkera CB100 for a while and moving up to a 4G3. Transmitter is a Walkera 2081Pro. Works fine with the CB100 in 2401 mode. With the 4G3 paired with the TX in 2081 mode I have no tail rotor, so I put it into 2601 mode and the tail rotor is working fine now. Problem is, I have zero pitch. In normal mode no positive pitch and in 3D mode no negative pitch. Throttles up fine, but the pitch never changes. Sure would appreciate any suggestions anyone might have. Thanks much.

Bob

Do you have the swash type set to 120 degrees? and have you set up the pitch curves?

Dusty

Silverexpress01 · 01-11-2010, 09:45 AM

My prior reply was inaccurate - I've removed it.

01-10-2010, 07:25 PM	#1
bobrains Registered Users Join Date: Jan 2010 Location: Richmond, KY	4G3 Has No Pitch Been flying a Walkera CB100 for a while and moving up to a 4G3. Transmitter is a Walkera 2081Pro. Works fine with the CB100 in 2401 mode. With the 4G3 paired with the TX in 2081 mode I have no tail rotor, so I put it into 2601 mode and the tail rotor is working fine now. Problem is, I have zero pitch. In normal mode no positive pitch and in 3D mode no negative pitch. Throttles up fine, but the pitch never changes. Sure would appreciate any suggestions anyone might have. Thanks much. Bob

01-11-2010, 08:51 AM	#2
Silverexpress01 Registered Users Join Date: Dec 2009 Location: MI	try this My prior reply was inaccurate - I've removed it. __________________ Jose (Youtube -> Silverexpress01 See also Helifreak Blog) MCPx 76/7 \| Trex 250 DFC 667/19 \| Hurricane 200 FES 143/7 Last edited by Silverexpress01; 02-28-2010 at 03:31 AM.. Reason: Learning and Discovering as I go....

01-11-2010, 09:45 AM	#4
Silverexpress01 Registered Users Join Date: Dec 2009 Location: MI	Regarding Pitch My prior reply was inaccurate - I've removed it. __________________ Jose (Youtube -> Silverexpress01 See also Helifreak Blog) MCPx 76/7 \| Trex 250 DFC 667/19 \| Hurricane 200 FES 143/7 Last edited by Silverexpress01; 02-28-2010 at 03:30 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode