tail motor started by itself

Dusty1000 · 05-02-2010, 03:13 PM

Wow first post in this forum for over a month. Am I the only one here still flying a 4G3?

Strange thing happened today, switched on TX and plugged in the lipo as usual, then instead of the heli initialising, the tail motor span up to full speed. Fortunately the heli was still in my hand so I just unplugged the lipo.

Tried again and it initialised as normal, flew another 2 lipos without any problems.

Anyone else had this happen?

Dusty

Steve Joblin · 05-02-2010, 05:02 PM

That is pretty weird. Never heard of that before. I have been experiencing a weird situation where I bind my 4G6 and the servos move like little "robots"... they don't move smoothy, but rather "choppy" and jump from position to position... difficult to explain, but they just don't operate smootly. I unplug the heli, turn off the TX, then go through the entire "turn on" process again, (TX on, then plug in heli battery, wait for it to initialize) and everything seems to move smooth and as one would expect. It has happened a few times, but doesn't happen all the time. Strange!

Dusty1000 · 05-02-2010, 07:59 PM

I haven't had that particular quirk happen before, it's almost like these helis have personalities

Dusty

Steve Joblin · 05-03-2010, 07:08 AM

Quote:

Originally Posted by Dusty1000

"it's almost like these helis have personalities"

Dusty

What do you mean by "like"... they actually do!!

-crash-wellthatdidntwork · 05-11-2010, 10:20 PM

dusty, mine did the same thing too. its a strange thing when the heli has a mind of its own. mine a few times wouldnt bind all the way, it would start and then just stop. i have also had mine in mid flight it would act like i switched it into 3d (without the exrtra speed) and the throttle would become the vertical movement. havent figured that one out either.

Wes

Dusty1000 · 05-12-2010, 07:04 AM

I told my 4G3 at the time that it was being naughty. I said 'DON'T DO IT AGAIN!!!'

Since then it has behaved itself

Dusty

-crash-wellthatdidntwork · 05-12-2010, 09:04 AM

hahahaha

i didnt have to say a word, i just gave it the raised eyebrow and itknew i ment business! haha

Wes

wschart · 05-18-2010, 11:30 PM

Well, I though I had things pretty well sorted out, but tonight I went to fly some and the tail won't turn at all. Seems to be related to putting on the canopy and perhaps rubberbanding up all the wires. I had this problem earlier today and I took the canopy and rubberband off and started messing around with the wire to see if something was loose. Eventually the rotor started turning. If I am remembering correctly, I did put the band back on and successfully flew some.

xp190 · 01-28-2011, 12:00 PM

Mine did the tail rotor spin up on me as well a few times, just unplug the batt and connect it up again. It thinks it can fly on its own, you have to set it straight.

xp

05-02-2010, 03:13 PM	#1
Dusty1000 Registered Users Join Date: Sep 2008 Location: Glasgow, U.K.	tail motor started by itself Wow first post in this forum for over a month. Am I the only one here still flying a 4G3? Strange thing happened today, switched on TX and plugged in the lipo as usual, then instead of the heli initialising, the tail motor span up to full speed. Fortunately the heli was still in my hand so I just unplugged the lipo. Tried again and it initialised as normal, flew another 2 lipos without any problems. Anyone else had this happen? Dusty __________________ Blade 400, mSR, mCPX - Sonix SX450SE - Walkera 1#A, 4#3, 4#3A, 4#3B, 4G3

05-02-2010, 07:59 PM	#3
Dusty1000 Registered Users Thread Starter Join Date: Sep 2008 Location: Glasgow, U.K.	I haven't had that particular quirk happen before, it's almost like these helis have personalities Dusty __________________ Blade 400, mSR, mCPX - Sonix SX450SE - Walkera 1#A, 4#3, 4#3A, 4#3B, 4G3

05-12-2010, 07:04 AM	#6
Dusty1000 Registered Users Thread Starter Join Date: Sep 2008 Location: Glasgow, U.K.	I told my 4G3 at the time that it was being naughty. I said 'DON'T DO IT AGAIN!!!' Since then it has behaved itself Dusty __________________ Blade 400, mSR, mCPX - Sonix SX450SE - Walkera 1#A, 4#3, 4#3A, 4#3B, 4G3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-02-2010, 05:02 PM	#2
Steve Joblin Registered Users My HF Map location Join Date: Aug 2008 Location: Blue Bell, PA USA	That is pretty weird. Never heard of that before. I have been experiencing a weird situation where I bind my 4G6 and the servos move like little "robots"... they don't move smoothy, but rather "choppy" and jump from position to position... difficult to explain, but they just don't operate smootly. I unplug the heli, turn off the TX, then go through the entire "turn on" process again, (TX on, then plug in heli battery, wait for it to initialize) and everything seems to move smooth and as one would expect. It has happened a few times, but doesn't happen all the time. Strange!

05-11-2010, 10:20 PM	#5
-crash-wellthatdidntwork Registered Users Join Date: May 2010 Location: Charlotte, NC	dusty, mine did the same thing too. its a strange thing when the heli has a mind of its own. mine a few times wouldnt bind all the way, it would start and then just stop. i have also had mine in mid flight it would act like i switched it into 3d (without the exrtra speed) and the throttle would become the vertical movement. havent figured that one out either. Wes

05-12-2010, 09:04 AM	#7
-crash-wellthatdidntwork Registered Users Join Date: May 2010 Location: Charlotte, NC	hahahaha i didnt have to say a word, i just gave it the raised eyebrow and itknew i ment business! haha Wes

05-18-2010, 11:30 PM	#8
wschart Registered Users Join Date: Feb 2010 Location: Columbia, MO	Well, I though I had things pretty well sorted out, but tonight I went to fly some and the tail won't turn at all. Seems to be related to putting on the canopy and perhaps rubberbanding up all the wires. I had this problem earlier today and I took the canopy and rubberband off and started messing around with the wire to see if something was loose. Eventually the rotor started turning. If I am remembering correctly, I did put the band back on and successfully flew some.

01-28-2011, 12:00 PM	#9
xp190 Registered Users Join Date: Dec 2010 Location: Toronto	Mine did the tail rotor spin up on me as well a few times, just unplug the batt and connect it up again. It thinks it can fly on its own, you have to set it straight. xp