Set up pics?

RaymondJ · 09-03-2010, 01:14 PM

Been looking around for pics of guys' 4g3's.

I've done the double BL conversion, but I'm having a hell of a time trying to fit the two escs in a nice fasion. No matter how I tape everything in there, it looks like crap.

I'm just curious how you guys have squeezed everything under the canopy.

pitchp · 09-16-2010, 11:13 AM

choose one.

RaymondJ · 09-16-2010, 01:19 PM

What skids are those on the one heli? Looks agressive, I like it. How much do they weigh if you know?

pitchp · 09-16-2010, 08:20 PM

It's from the FF EP200. It has helped me so much on my landings, I use to land to hard, so these were more ideal, also when I fly it in small spaces like my living room, it is more docile + the flybar weights. I use the other one for outdoor use. I'm still trying to get the right Emix and Pmix and DR settings, to get this bird more stable. Dialing this bird is not that easy, but once I figure it out, I'm sure it will be easy then. However It would be nice to know if someone actually got their stock 4g3 dialed in solid and stable. I would love to see their Pmix,Expo,P&T Curves, and DR settings. I know a few people has it, they just don't want to share it.

Weight: 5 grams You can make it less by trimming the skids, but I didn't think about it back then, so may be if you trim it, about 3-4 grams.

P.S I put on the EP200 Flybar Paddles, and it slowed this little animal to almost like a Blade MCX. It's SUperkool!

jlcoolio70 · 01-21-2011, 01:40 PM

how slow dit it make the heli with the paddles? and can you show a better pic of the bottom for me to see how you mounted them skids..er landing gear

*sorry for the double post..I thought I had deleated the first one wont happen again my keyboard is junk*

jlcoolio70 · 01-21-2011, 01:56 PM

really like the mod's just want to know how much did the fly bar paddles take away from the speed.do you think it took the 3d flight capabilities away from the helli.and the landing gear what mods did you do to make them fit any way to get a better pic of the bottom..i have both the novus cp and the 4g3 and want to set mine up the same one outdoor and one in

pitchp · 02-12-2011, 05:55 AM

CrashmanEd · 02-28-2011, 08:03 PM

Here's how I did it on my HeliMax Novus CP. WOW Hobbies upgrades:

Steven87 · 03-07-2011, 04:06 PM

I chopped mine up to reduce weight and get it to fit properly (Buzzfly 3D is just a rebranded 4G3). With the reduced weight the canopy is required for it to balance properly and it flies great (definately made a difference to the throttle response).

I explained it all in this thread: http://www.helifreak.com/showthread....07#post1561207

09-03-2010, 01:14 PM	#1
RaymondJ Registered Users Join Date: Apr 2009 Location: alberta canada	Set up pics? Been looking around for pics of guys' 4g3's. I've done the double BL conversion, but I'm having a hell of a time trying to fit the two escs in a nice fasion. No matter how I tape everything in there, it looks like crap. I'm just curious how you guys have squeezed everything under the canopy.

09-16-2010, 11:13 AM	#2
pitchp Registered Users Join Date: Aug 2010 Location: kazakhstan	choose one. Attached Thumbnails

09-16-2010, 08:20 PM	#4
pitchp Registered Users Join Date: Aug 2010 Location: kazakhstan	It's from the FF EP200. It has helped me so much on my landings, I use to land to hard, so these were more ideal, also when I fly it in small spaces like my living room, it is more docile + the flybar weights. I use the other one for outdoor use. I'm still trying to get the right Emix and Pmix and DR settings, to get this bird more stable. Dialing this bird is not that easy, but once I figure it out, I'm sure it will be easy then. However It would be nice to know if someone actually got their stock 4g3 dialed in solid and stable. I would love to see their Pmix,Expo,P&T Curves, and DR settings. I know a few people has it, they just don't want to share it. Weight: 5 grams You can make it less by trimming the skids, but I didn't think about it back then, so may be if you trim it, about 3-4 grams. P.S I put on the EP200 Flybar Paddles, and it slowed this little animal to almost like a Blade MCX. It's SUperkool! Attached Thumbnails Last edited by pitchp; 09-17-2010 at 06:44 AM..

01-21-2011, 01:40 PM	#5
jlcoolio70 Registered Users Join Date: May 2010 Location: usa illinois c/u	how slow dit it make the heli with the paddles? and can you show a better pic of the bottom for me to see how you mounted them skids..er landing gear sorry for the double post..I thought I had deleated the first one wont happen again my keyboard is junk Last edited by jlcoolio70; 01-21-2011 at 07:24 PM..

02-12-2011, 05:55 AM	#7
pitchp Registered Users Join Date: Aug 2010 Location: kazakhstan	__________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Just how deep does the rabbit hole go?

09-16-2010, 01:19 PM	#3
RaymondJ Registered Users Thread Starter Join Date: Apr 2009 Location: alberta canada	What skids are those on the one heli? Looks agressive, I like it. How much do they weigh if you know?

01-21-2011, 01:56 PM	#6
jlcoolio70 Registered Users Join Date: May 2010 Location: usa illinois c/u	really like the mod's just want to know how much did the fly bar paddles take away from the speed.do you think it took the 3d flight capabilities away from the helli.and the landing gear what mods did you do to make them fit any way to get a better pic of the bottom..i have both the novus cp and the 4g3 and want to set mine up the same one outdoor and one in

02-28-2011, 08:03 PM	#8
CrashmanEd Registered Users My HF Map location Join Date: Jun 2010 Location: Connecticut	Here's how I did it on my HeliMax Novus CP. WOW Hobbies upgrades: Attached Thumbnails __________________ Fusion 50 w/ Quantum 4125-560 motor, AR7200BX, Kontronik Jive 80+ HV, Torq servos, Radix 600FBL blades, Radix tail; Align 450 Pro DFC stock, except for AR7200BX.

03-07-2011, 04:06 PM	#9
Steven87 Registered Users Join Date: Sep 2009 Location: UK	I chopped mine up to reduce weight and get it to fit properly (Buzzfly 3D is just a rebranded 4G3). With the reduced weight the canopy is required for it to balance properly and it flies great (definately made a difference to the throttle response). I explained it all in this thread: http://www.helifreak.com/showthread....07#post1561207

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode