No Ino-Lab HDG 261 mg to be found!

[Flyguide7]

I bought a Funcopter three months ago and still cannot find Ino Labs tail servo. Can anyone recommend an alternative? Thanks in advance.

[AtTheCross]

i use HS81mg all the way around with my funcopters

[krobinson103]

Try Nexus servos. Inolab and Nexus are the same manufacturer just with a different name. The specs on the similar model servos are almost identical.

[TomC]

Originally Posted by AtTheCross

i use HS81mg all the way around with my funcopters

Don't you mean Hitec HS82mg's? These are great servos imho.

Cheers,
TomC

[AtTheCross]

Opps :o yep meant hs82mg

[prophead]

i have 5084mg on me FC.
Q: has anybody squeezd in an FC into a 450 fuse?
ATC, where can i find the gear for the mainshaft for belt conversion? well, other than your product. my FC is itchin to come out from its box again. did flew her about 5 packs.
now im planning to dress her up with an md500.
thanks.

[prophead]

oh, i bought her new jewelry, a 90amp gold scorpion.

[gale155]

Originally Posted by prophead

i have 5084mg on me FC.
Q: has anybody squeezd in an FC into a 450 fuse?
ATC, where can i find the gear for the mainshaft for belt conversion? well, other than your product. my FC is itchin to come out from its box again. did flew her about 5 packs.
now im planning to dress her up with an md500.
thanks.

I've got a 500 fuse (A-109) sitting next to my FC, and it's not that much larger. I've not measured anything, but with a few mods I'll bet it could be done. Whether or not the FC could handle the weight is another question, but I'm guessing it could on 4s.

[AtTheCross]

funny, i have a 500 class md500 that i just started working on for my FC, i'm thinking that on the new v2 motor it will 'work' but agree would be better on 4s.

be sure to post your finished heli and i'll do the same

[gale155]

Originally Posted by AtTheCross

funny, i have a 500 class md500 that i just started working on for my FC, i'm thinking that on the new v2 motor it will 'work' but agree would be better on 4s.

be sure to post your finished heli and i'll do the same

I'm not even thinking of trying to fit the FC in the Align A-109 fuse...I've got an EXI 500 with a Copter-X flapping 4-blade for that. I've got to work on my basic piloting skills some more before I think about finishing that project. I have thought about a less-expensive 500-class fuse for the FC though, but I'm still in the "thinking" phase.

I seem to recall from one of your mega-threads at another site that you have to shorten a 500 boom slightly when doing your belt mod. Excuse the noob question, but why do you have to do that? Seems to me that if you left the boom as-is, it could be fitted into a 500 fuse with fewer modifications. I assume it must have something to do with available belt lengths? This is way out of my league at the moment, but I'm just curious.