Hard case for my Beam

dpelletier · 01-22-2012, 10:48 AM

Looking around for a decent hard case for my Beam E4...
Came across Mike's photo here:
http://helifreak.com/showpost.php?p=...&postcount=110

Mike Tell me this is a Generic he picked up a few years ago, looks like a really good fit, its not an Align case which is somewhat of a tight fit for a Beam.

I currently use the Beam E4 (Wingtote) soft case, but it does not do well strapped on the back of a motorcycle.

What are you guys using as hard cases for your Beam E4?

krobinson103 · 01-27-2012, 09:20 AM

Just made a wooden crate Beam sized lined with camp mat and some webbing on the floor to lock the heli down. I designed it so that the height is exactly the same as the Beam so the lid locks the head down and nothing can move. Its a bit heavy, but there is no chance of the heli moving and since its designed to be strapped to the back of my bike I'd prefer it to be strong than light. While I'm no carpenter and its not pretty I'm sure it protect the helicopter well.

Most of the club guys here in Korea use a generic 450 hard case and just custom cut the foam to make it fit.

Tjomp · 01-28-2012, 05:46 AM

The one I used to have my Beam in, worked very well for me and looks very similar to the one you linked to.

http://www.ehirobo.com/shop/product_...oducts_id=4823

Kumppari · 01-28-2012, 09:33 AM

mine says e-sky on the top. it was the cheapest generic case around at the time i got my e4. works as well with just about any 450 size heli.

01-22-2012, 10:48 AM	#1
dpelletier Registered Users My HF Map location Join Date: Apr 2010 Location: South of the Border, Maynard, Massachusetts	Hard case for my Beam Looking around for a decent hard case for my Beam E4... Came across Mike's photo here: http://helifreak.com/showpost.php?p=...&postcount=110 Mike Tell me this is a Generic he picked up a few years ago, looks like a really good fit, its not an Align case which is somewhat of a tight fit for a Beam. I currently use the Beam E4 (Wingtote) soft case, but it does not do well strapped on the back of a motorcycle. What are you guys using as hard cases for your Beam E4? __________________ Dany Synergy E5 in the works Furion 6 Flybarless, Skookum 720 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Beam E4(v1) FBL, Skookum 540

01-28-2012, 05:46 AM	#3
Tjomp Registered Users My HF Map location Join Date: Apr 2009 Location: Norway	The one I used to have my Beam in, worked very well for me and looks very similar to the one you linked to. http://www.ehirobo.com/shop/product_...oducts_id=4823 __________________ Beam E4, MSH Protos, Trex-250

01-28-2012, 09:33 AM	#4
Kumppari Registered Users Join Date: Jan 2010 Location: Finland	mine says e-sky on the top. it was the cheapest generic case around at the time i got my e4. works as well with just about any 450 size heli. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-27-2012, 09:20 AM	#2
krobinson103 Registered Users Join Date: Sep 2011 Location: South Korea, Shihung (South of Seoul)	Just made a wooden crate Beam sized lined with camp mat and some webbing on the floor to lock the heli down. I designed it so that the height is exactly the same as the Beam so the lid locks the head down and nothing can move. Its a bit heavy, but there is no chance of the heli moving and since its designed to be strapped to the back of my bike I'd prefer it to be strong than light. While I'm no carpenter and its not pretty I'm sure it protect the helicopter well. Most of the club guys here in Korea use a generic 450 hard case and just custom cut the foam to make it fit.