1980s uh1b huey parts needed - Page 2

Ah Clem · 03-09-2012, 07:38 PM

Outstanding that you have one in that condition!

The blade grips were getting hard to get quite a while back, and they are completely in tact, in the photo!

billym8228 · 03-10-2012, 06:14 AM

Wat do u want for the tail box and the piece that holds the wire to it.I haven't got to do much to it lately.I need yo break the engine in.it has never been ran. As far as clutch I think ill do wat u did have one machined the ordinal is there its never been used.wat servos and gyro do u suggest?

craigr · 03-10-2012, 08:27 AM

I was thinking 45 shipped. Unless you got something to trade. Hmmm.

billym8228 · 03-10-2012, 09:52 AM

Wat do you need I got quiet a bit of stuff.wat size of main blades do I need?

billym8228 · 03-10-2012, 11:09 AM

Hey even if we don't trade on something ill buy the tail box k.thanks billy

craigr · 03-15-2012, 08:36 AM

I would use the engine that it has as long as its not damaged. Open the case, get some oil in there let it sit for a day or so, get it turning nice. It will probably fire right up. I haven't had any old engines not fire up. As far as servos go I would go with a nice digital. Doesn't need to be super strong or fast for 3D just good quality.

bigdaddyg55 · 04-01-2012, 02:14 PM

I have had this stuff since about 1987...... lol

billym8228 · 04-03-2012, 09:34 PM

Hi yes sir I'm interested.for some reason I can't pm you.my email is billym8228@Hotmail.com could u contact me with price.thanks

billym8228 · 04-07-2012, 08:52 AM

Quote:

Originally Posted by bigdaddyg55

I have had this stuff since about 1987...... lol

Hey goodmorning.Im very interested in the huey if you want to sell or trade it.wat would you want for it? my email is billym8228@hotmail.com and phone number is 1-870-754-5596 thanks.

billym8228 · 04-07-2012, 05:14 PM

Quote:

Originally Posted by bigdaddyg55

I have had this stuff since about 1987...... lol

Hey wat do you want for the Huey u have? I would like to buy it from you.

aaronbru · 04-25-2012, 07:07 AM

Hope you get some parts soon! that thing is gonna be awesome! (bump)

billym8228 · 05-02-2012, 11:15 AM

Yea me to its gonna b nice I hope.

billym8228 · 05-02-2012, 11:16 AM

Me to hope it turns out nice.

heli143 · 12-13-2012, 01:35 PM

bigdaddy,
I have the same huey but a reproduction I got about five years ago.
Unique Models in Dalton GA sells them.
here is a pic of mine when I test flew it last week after converting the mechanics to electric. I also posted a video of the test flight on youtube.

YouTube

03-09-2012, 07:38 PM	#21
Ah Clem Registered Users Join Date: Jan 2006 Location: Alhambra, CA	Outstanding that you have one in that condition! The blade grips were getting hard to get quite a while back, and they are completely in tact, in the photo! __________________ KBDD-Team Pilot Team Compass / ProStar Hobby Gens Ace Field Representative Warp 360, 7HV,Knight Pro,Knight 3D, Atom 500, Odin II, 6HV, 3D Plus, Knight 50

04-01-2012, 02:14 PM	#27
bigdaddyg55 Registered Users Join Date: Jan 2012 Location: Conroe,TX	UH1B I have had this stuff since about 1987...... lol Attached Thumbnails

04-25-2012, 07:07 AM	#31
aaronbru Registered Users My HF Map location Join Date: Mar 2012 Location: Rhode Island	Hope you get some parts soon! that thing is gonna be awesome! (bump) __________________ Helis: Blade 120 SR (duct collector), mCPX V2, 450 3D Transmitters: DX6i, DX5e, 120sr stocky Sim: Phoenix

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-10-2012, 06:14 AM	#22
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Wat do u want for the tail box and the piece that holds the wire to it.I haven't got to do much to it lately.I need yo break the engine in.it has never been ran. As far as clutch I think ill do wat u did have one machined the ordinal is there its never been used.wat servos and gyro do u suggest?

03-10-2012, 08:27 AM	#23
craigr Registered Users My HF Map location Join Date: Feb 2009 Location: yakima, wa	I was thinking 45 shipped. Unless you got something to trade. Hmmm.

03-10-2012, 09:52 AM	#24
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Wat do you need I got quiet a bit of stuff.wat size of main blades do I need?

03-10-2012, 11:09 AM	#25
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Hey even if we don't trade on something ill buy the tail box k.thanks billy

03-15-2012, 08:36 AM	#26
craigr Registered Users My HF Map location Join Date: Feb 2009 Location: yakima, wa	I would use the engine that it has as long as its not damaged. Open the case, get some oil in there let it sit for a day or so, get it turning nice. It will probably fire right up. I haven't had any old engines not fire up. As far as servos go I would go with a nice digital. Doesn't need to be super strong or fast for 3D just good quality.

04-03-2012, 09:34 PM	#28
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Hi yes sir I'm interested.for some reason I can't pm you.my email is billym8228@Hotmail.com could u contact me with price.thanks

05-02-2012, 11:15 AM	#32
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Yea me to its gonna b nice I hope.

05-02-2012, 11:16 AM	#33
billym8228 Registered Users Thread Starter Join Date: May 2009 Location: usa arkansas	Me to hope it turns out nice.