titan x50e need info

daveiga2005 · 08-27-2012, 09:26 AM

need pics of some wireing im running beastx and with it in the back my servos don't reach and is there any other place were i can put the beastx.im using all servos and ecs,motor from a trex 600 efl thanks for any info

charliejjr · 08-27-2012, 10:55 AM

I mounted mine in the back and you will need a couple of servo extensions to reach it.
My son mounted his up front on the side of the frame and I believe he had to use a couple of servo extensions also. Here's a couple of pictures. Hope this helps you out.

Charlie

daveiga2005 · 08-27-2012, 01:16 PM

thank. how do you like the x50.im coming from the trex600 efl.and aare you runing 12s.and wats a good headspeed for this heli doing mild 3d.thanks again for the pics

charliejjr · 08-28-2012, 11:27 AM

See this thread. I posted my setup there.

http://helifreak.com/showthread.php?t=426433

Charlie

daveiga2005 · 08-28-2012, 04:06 PM

i think im going to mount it on the side.and i checked out your post thanks

raptorz499 · 08-28-2012, 04:11 PM

I mounted mine right on the front tray laying flat as close to the servos as possible...works great.

daveiga2005 · 08-28-2012, 06:38 PM

raporz499 i was thinking the same thing.are you running a beastx?and how is the tail holding being that far from the main shaft.

raptorz499 · 08-28-2012, 08:18 PM

Solid as a rock bud! I can send you a picture if you like? I have the esc sideways in the front tray and the lipo forvthe electronics where the esc "should be"
Pm me your email address and I can send picture

daveiga2005 · 08-29-2012, 07:40 AM

Pm sent.I'm using the Bec pro that's connects to one of my 6s lipo.I'm running the tp 3850 65c x2 i think it saves a little weight.this is the set up i was running on the trex600 efl I'll post pics when I'm done with the build.thanks to everybody that posted to help me out heli freak #1 can't wait to get it up and going.now i need to know watt its a good headspeed for doing mild 3d thanks again everybody for the help

08-27-2012, 10:55 AM	#2
charliejjr Registered Users Join Date: Mar 2008 Location: Buffalo. NY	I mounted mine in the back and you will need a couple of servo extensions to reach it. My son mounted his up front on the side of the frame and I believe he had to use a couple of servo extensions also. Here's a couple of pictures. Hope this helps you out. Charlie Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-27-2012, 09:26 AM	#1
daveiga2005 Registered Users Join Date: Jan 2011 Location: us,mass,taunton	titan x50e need info need pics of some wireing im running beastx and with it in the back my servos don't reach and is there any other place were i can put the beastx.im using all servos and ecs,motor from a trex 600 efl thanks for any info

08-27-2012, 01:16 PM	#3
daveiga2005 Registered Users Thread Starter Join Date: Jan 2011 Location: us,mass,taunton	thank. how do you like the x50.im coming from the trex600 efl.and aare you runing 12s.and wats a good headspeed for this heli doing mild 3d.thanks again for the pics

08-28-2012, 11:27 AM	#4
charliejjr Registered Users Join Date: Mar 2008 Location: Buffalo. NY	See this thread. I posted my setup there. http://helifreak.com/showthread.php?t=426433 Charlie

08-28-2012, 04:06 PM	#5
daveiga2005 Registered Users Thread Starter Join Date: Jan 2011 Location: us,mass,taunton	i think im going to mount it on the side.and i checked out your post thanks

08-28-2012, 04:11 PM	#6
raptorz499 Registered Users Join Date: Feb 2008	I mounted mine right on the front tray laying flat as close to the servos as possible...works great.

08-28-2012, 06:38 PM	#7
daveiga2005 Registered Users Thread Starter Join Date: Jan 2011 Location: us,mass,taunton	raporz499 i was thinking the same thing.are you running a beastx?and how is the tail holding being that far from the main shaft.

08-28-2012, 08:18 PM	#8
raptorz499 Registered Users Join Date: Feb 2008	Solid as a rock bud! I can send you a picture if you like? I have the esc sideways in the front tray and the lipo forvthe electronics where the esc "should be" Pm me your email address and I can send picture

08-29-2012, 07:40 AM	#9
daveiga2005 Registered Users Thread Starter Join Date: Jan 2011 Location: us,mass,taunton	Pm sent.I'm using the Bec pro that's connects to one of my 6s lipo.I'm running the tp 3850 65c x2 i think it saves a little weight.this is the set up i was running on the trex600 efl I'll post pics when I'm done with the build.thanks to everybody that posted to help me out heli freak #1 can't wait to get it up and going.now i need to know watt its a good headspeed for doing mild 3d thanks again everybody for the help