Schematics for HV tail with LV cyclic servos with Gryphon QUASAR BEC

[smytilineos]

Anybody has a schematic to show how to connect a HV tail to a Gryphon QUASAR while powering the RX and the cyclic servos from the Kontronik BEC?

I would guess you can connect all grounds (black) together and drive the tail servo with power (red) from the Gryphon and signal (white) from the receiver.

The remaining servos are powered and signaled from the receiver (which is connected to the Kontronic BEC power).

However, what happens to the Gryphone switch. It would only 'contain' power to the tail, not to the RX. That doesn't sound good...

???