What servos and blades for a Fury 55

[Rudy]

Looking at building a Fury 55 with a OS 55, and AR7200BX FBL. What servos and blades are you running?

[jgalen0025]

WELL servos can go any way just depends on how much money you have
As far as blades 620s are where it is at
I run mav wc 620mm

[Rudy]

Originally Posted by jgalen0025

WELL servos can go any way just depends on how much money you have
As far as blades 620s are where it is at
I run mav wc 620mm

Ok that's nice, but I still need ideals for servos. I know the throttle servo is set up for a small futaba, not sure which one.

Whats a good servo for the tail if I'm using the AR7200BX?

For the head I'm looking a good digital servo that wont break the bank. Shoot I ran Futaba 3001's in my Raptor 50 and it flew just fine.

What tail blades are you running.

Thanks

[SamIAm]

BLS451's would be perfect for cyclic. I'd use a BLS251 or a BLS256HV for the tail depending on what voltage you're running

[Peter]

Absolutely nothing wrong with Align/savox ds610/615's on swash , and 650/655 on the tail either .....
a 9252 works great on throttle on mine....

[dchekas]

I know several guys having good luck with the DS610s on the Fury 55.

I personally ran BLS451's, they worked very well also.

I'd recommend either the BLS251 or BLS256HV as said above for the tail though.

[rcflyerheli]

I just finished a setup for a buddy with DS 610s all the way around. Everything fit like a glove.