Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Gryphon Electronics


Gryphon Electronics Gryphon Electronics Factory Support Forum


Reply
 
Thread Tools Display Modes
Old 01-31-2012, 11:18 PM   #1
daisydog
Registered Users
 
Posts: 153
 

Join Date: Dec 2008
Location: Burlington, ON, CAN
Default Gryphon Extreme Regulator

Does any one know if I can use the AUX port on the Gryphon Extreme Regulator to power the Switchglow?

I can't seem to find to much information about that port and what it can be used for.

Thanks

joe
daisydog is offline        Reply With Quote
Old 06-14-2012, 05:31 PM   #2
Fabien
Registered Users
 

Join Date: Feb 2006
Location: France
Default

Hi Joe,

the AUX port is ONLY for the low voltage alarm optional board or integrated low voltage alarm on some switches. You shall not use it to power any device, BUT you can use a Y cable from the regulator servo or receiver outputs ( depends if you use a GVR or GSR model) to power the glow ignitor or any other device, as long as the summ of devices plugged on it do require more current than the unit can give,

BEst regards,

Fabien
Fabien is offline        Reply With Quote
Old 09-30-2012, 12:28 AM   #3
sixback
Registered Users
 

Join Date: Mar 2010
Location: St. Kitts, Ontario, Canada
Default

I power my gryphon little auto booster from the (-)(+) pins of the AUX port while using the signal pin for my low voltage alarm LED.

Don't see any issues with it.
sixback is online now        Reply With Quote
Old 05-15-2013, 11:47 PM   #4
banteng
Registered Users
 
Posts: 51
 

Join Date: Sep 2010
Location: Jakarta - Indonesia
Default

Hello, I've gvr7020s, can you tell me what is exactly the voltage output on the AUX port (+ , - ).
I'm intended to use it to power the my RX. is it 5,2V output on Aux Port ?

thank you.
__________________
Trex700E DFC HV 3GX V4.0 Super Combo GVR-7020S
Trex600EFL Pro 3GX V4.0 Super Combo
Trex450SE-V2 FBL Tarot ZYX V.4.01
JR XG7
banteng is offline        Reply With Quote
Old 07-05-2013, 08:25 PM   #5
CoolKD
Registered Users
 
Posts: 744
 

Join Date: Jul 2009
Location: Oslo, Norway
Default

Quote:
Originally Posted by banteng View Post
Hello, I've gvr7020s, can you tell me what is exactly the voltage output on the AUX port (+ , - ).
I'm intended to use it to power the my RX. is it 5,2V output on Aux Port ?

thank you.
The + - on the aux port is the same voltage as what you set the servo ports to.
This is stated in the manual. Just read it now cos I'm in the proses of installing the 7020 now.
It also states that you can use the aux as an extra output on the + - tabs.
__________________
Blade MSR, MCPX v2 & 400 3D NightRig
Align Trex450 pro. KDE FBL Head & BatTray,MKS DS95,FutabaBLS257,BeastX, ICE50, CC BEC, Scorpion6
Align Trex700LE N. LYNX Clush/Liner, Quark,Hatori SB20FH-2,O.S91HZ
CoolKD is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > Gryphon Electronics


Gryphon Electronics Gryphon Electronics Factory Support Forum

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com