720 Setup Files

[chopstick]

I just started with a SK540 on my Compass Atom550.
So here's my setupfile: posted in : http://helifreak.com/showthread.php?t=445041&page=4
I disovered I couldn't upload the same file on 2 posts, so linked it.

My setup is as follows:
Atom 550, stock blades, KBDD tailblades 84.5 mm
swashservo's align DS510
Tailservo : align DS650
ESC kontronik Jive 60 amp with heatsink

My endpoints for cyclic in the TX are 30/32 (bank 1 / bank 2).
I locked the tailgain, and switch the tailbank with thesame switch as the cyclic banks.
Only difference in the tailbanks is the controlrate.

If you have improvements, be my guest.
I'm still in the adjusting fase. Finding the best settings for my flyingstyle (mild 3D).

[pugdavey]

Anyone got a file for a 450pro?

Sent from my LT26i using Tapatalk 2

[Spork01]

Originally Posted by pugdavey

Anyone got a file for a 450pro?

Sent from my LT26i using Tapatalk 2

Yes I would like to know what other 450 pro fliers is using.

I'll post mine when I get a chance tonight or tomorrow

[RyanB]

I'm still working on getting my 450 Pro dialed in on the 540. Once I get it worked out I'll post up my file and specs. Like Spork I'm curious to find out what others are running.

[JBlade@HF]

Would be great to get the set-up from someone who has fully tuned their 450Pro with the SK540. I'm gradually getting mine where I like it, but it still tends to drift with the wind, and I'm not sure what I should be adjusting to make it more stable.

[CHIEF-X]

Originally Posted by JBlade@HF

Would be great to get the set-up from someone who has fully tuned their 450Pro with the SK540. I'm gradually getting mine where I like it, but it still tends to drift with the wind, and I'm not sure what I should be adjusting to make it more stable.

check this thread out in the sticky section

http://www.helifreak.com/showthread....26#post4710626

[NavaraHeli]

HI all

I am new here especially with the Skookum so please help?

I have a Skookum 720 setup on my heli.

I have done all the wizard setups as were told. Now I have the issue of when I test and tilt the nose down, the Skookum is not countering the swash and instead gives extra pitch. this goes for Aileron as well as Elevator?

Is there any values I need to setup to negative instead of positive or what do I need to do or is this normal. As far as I know and have learned that it is suppose to counter?

And what would be the ideal pitch settings neg , mid and pos?

Any help will be much appreciated please?

Heli:

Scale BO 105
OS 90 SZ
JR 8301 digitals
ALign ds 655 tail
Vario 4 blade head and Vario scale blades
Robbe Shluzer Millenium 90 size frame

Regards

[georgi UK]

=] have you set the handset to 1 servo 90 deg swash type? all mixing is done in the SK....

[NavaraHeli]

HI

yes, 1 servo 90 degrees setup.

I cant upload the setup file cause it's a .sk7 file extension. Any way I can change it?

thx so far

[georgi UK]

=] if this is a dx6i change the swash mix to a negative value, mail me the setup file = gmcallister@ocvc.ac.uk

[NavaraHeli]

Sorry forgot. I have the Aurora 9 with Optic 9 RX