Need help with new build electronics

zes0086 · 11-20-2012, 07:52 PM

Ok, i will start what i have in the heli, I have an specktrum AR8000 satelite receiver and a Futaba GY520 gyro and useing a DX6i to control all of this. I have the rudder and throttle working but can't get the fifth servo to work. any ideas on how this should be plugged into the reciever? Any and all help would be grateful. Thank You !

tr911 · 11-21-2012, 06:43 AM

Go to the top of the Helifreak forums and in the list you will see Finless Bobs tech room. Here you will find examples on how to assemble, and set up the mechanics and electronics on a CCPM helicopter. If you have the manual it will help a lot too. Here is a short cut to Finless Bobs Tech stuff.
http://www.helifreak.com/forumdisplay.php?f=60

zes0086 · 11-21-2012, 12:19 PM

Thank you very much!

11-20-2012, 07:52 PM	#1
zes0086 Registered Users Join Date: Nov 2011 Location: ohio	Need help with new build electronics Ok, i will start what i have in the heli, I have an specktrum AR8000 satelite receiver and a Futaba GY520 gyro and useing a DX6i to control all of this. I have the rudder and throttle working but can't get the fifth servo to work. any ideas on how this should be plugged into the reciever? Any and all help would be grateful. Thank You !

11-21-2012, 06:43 AM	#2
tr911 Registered Users Join Date: Sep 2010 Location: Leeds, Al.	Go to the top of the Helifreak forums and in the list you will see Finless Bobs tech room. Here you will find examples on how to assemble, and set up the mechanics and electronics on a CCPM helicopter. If you have the manual it will help a lot too. Here is a short cut to Finless Bobs Tech stuff. http://www.helifreak.com/forumdisplay.php?f=60 __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Titan x50 FBL, R50 Titan SE FBL, R50 V2, R30 V2 , Trex500, T-Rex 450x2, mCPx X2,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-21-2012, 12:19 PM	#3
zes0086 Registered Users Thread Starter Join Date: Nov 2011 Location: ohio	Thank you very much!