info needed on roll rates???

Lee777 · 12-01-2012, 04:44 PM

Hi Lads,
I have just programmed my 3g unit, i did all the limits and swash moving the correct way but how do i lower the swash roll and elev rates?? do i just set them in the tx like on a flybarred heli?? and do i set the tail gyro gain in the tx aswell??
Cheers lads any help apreciated so i can get it sorted and go test flying in the morning

bad007 · 12-01-2012, 07:48 PM

With the 3G you actually get all the cyclic you programmed at 80% stick so use DRs and go straight to 85% and you'll still have all the cyclic you programmed but not till 95% stick that way. Set TX expo to 30 and cyclic expo in the software to 0 for maden. Yes use the roll rates to tame it down and fine tune it. For example my 550 and 500 is setup at 13.5 cyclic, DRs at 85 and some expo to tame it down around center stick. No DRs with 13.5 is super twitchy
Read post 8 and 10
http://helifreak.com/showthread.php?t=473914

Lee777 · 12-02-2012, 03:28 AM

Can i use my 3gx software and lead to set this 3g unit up?? Or it it different?

bad007 · 12-02-2012, 07:48 AM

Quote:

Originally Posted by Lee777

Can i use my 3gx software and lead to set this 3g unit up?? Or it it different?

3G software is totally different and requires you to download and install it. You need to get it installed because the 3G has small and large helli settings to load into the controller. The 3GX dongle will work on both 3G and 3GX.

Lee777 · 12-02-2012, 02:37 PM

What version is best to download??

bad007 · 12-02-2012, 03:23 PM

Quote:

Originally Posted by Lee777

What version is best to download??

2.1

12-01-2012, 04:44 PM	#1
Lee777 Registered Users My HF Map location Join Date: Nov 2007 Location: U.K. West Mids	info needed on roll rates??? Hi Lads, I have just programmed my 3g unit, i did all the limits and swash moving the correct way but how do i lower the swash roll and elev rates?? do i just set them in the tx like on a flybarred heli?? and do i set the tail gyro gain in the tx aswell?? Cheers lads any help apreciated so i can get it sorted and go test flying in the morning __________________ Dx6i - Dx7S T rex 500 esp - T rex 250 - Blade MSR - Blade MCPX - Trojan T-28D - Micro Trojan T-28 Hacker Hotwing To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

12-01-2012, 07:48 PM	#2
bad007 Registered Users Join Date: Nov 2009 Location: New Brighton, PA	With the 3G you actually get all the cyclic you programmed at 80% stick so use DRs and go straight to 85% and you'll still have all the cyclic you programmed but not till 95% stick that way. Set TX expo to 30 and cyclic expo in the software to 0 for maden. Yes use the roll rates to tame it down and fine tune it. For example my 550 and 500 is setup at 13.5 cyclic, DRs at 85 and some expo to tame it down around center stick. No DRs with 13.5 is super twitchy Read post 8 and 10 http://helifreak.com/showthread.php?t=473914 __________________ Align 450Pro 3GX, Align 500 3G Align 550 3g, Velocity 50 Vbar

12-02-2012, 03:28 AM	#3
Lee777 Registered Users Thread Starter My HF Map location Join Date: Nov 2007 Location: U.K. West Mids	Can i use my 3gx software and lead to set this 3g unit up?? Or it it different? __________________ Dx6i - Dx7S T rex 500 esp - T rex 250 - Blade MSR - Blade MCPX - Trojan T-28D - Micro Trojan T-28 Hacker Hotwing To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

12-02-2012, 02:37 PM	#5
Lee777 Registered Users Thread Starter My HF Map location Join Date: Nov 2007 Location: U.K. West Mids	What version is best to download?? __________________ Dx6i - Dx7S T rex 500 esp - T rex 250 - Blade MSR - Blade MCPX - Trojan T-28D - Micro Trojan T-28 Hacker Hotwing To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode