problems bearing blocks/ servo frames?? Pics added.. - Page 2

CrashAddict · 12-08-2012, 01:52 PM

Yeah, those vendors are good. The 3rd bearing support and plastic frame parts have the same type of insert but I dont see any issues with those.

yachtheli · 12-09-2012, 10:53 AM

just added some pics to the original post..

eder0022 · 12-10-2012, 11:26 PM

I found the culprit...

yachtheli · 12-17-2012, 08:21 PM

Readyheli is not stocking MSH anymore so they refunded me. Helidirect sent me a replacement set of servo frames and they are just like the first two sets, maybe even worse. So my build is still on hold

yachtheli · 12-17-2012, 08:25 PM

The CNC servo frames are simply no where to be found. Out of stock everywhere...

CrashAddict · 12-18-2012, 12:09 PM

MSH says a couple more weeks they should be stock.

yachtheli · 01-05-2013, 04:57 PM

Still no stock on the cnc frames that I don't even really want to buy. This kit has been a waste of money at this point.

I can't believe more people are not speaking up about the crap parts in the kit...

CrashAddict · 01-05-2013, 06:29 PM

I have 4 of the CNC frames just sitting here. 2 for my new kit and 2 spares :-) Well, I don't feel that bad. I imagine from the time they run out to the time they get more can be made longer by the Christmas break.

Dogga · 01-10-2013, 11:55 PM

Well doing my Mini Protos and I have come across the same issue.... yay......... so excited to build this over the weekend now I can't do anything!!! So annoying!!! Now I have to wait until the middle of next week until an M2 thread tap gets here as no one in my area stocks this size..... There goes half of my next week that I have off work just waiting for this thing..... ARGH!

CrashAddict · 01-11-2013, 08:15 AM

I ran a tap through mine. The temptation is to tap it out all the way through. You risk damaging the tap, running the hole off center if you do that. You need a bottoming tap to do it right.

matt-snitters · 01-11-2013, 11:27 AM

I collect mine tomorrow. Hope mine isn't the same!!

CrashAddict · 01-11-2013, 02:16 PM

Probably will be. Collect a new 2mm tap anyways. It comes in handy.

Dogga · 01-11-2013, 04:54 PM

Yeah I ordered a bottoming tap

yachtheli · 01-13-2013, 10:29 PM

Quote:

Originally Posted by Dogga

Well doing my Mini Protos and I have come across the same issue.... yay......... so excited to build this over the weekend now I can't do anything!!! So annoying!!! Now I have to wait until the middle of next week until an M2 thread tap gets here as no one in my area stocks this size..... There goes half of my next week that I have off work just waiting for this thing..... ARGH!

I feel your pain. Mine is still sitting on the bench, over a month now. Worst part is, I tore apart my go to 450 to build this kit. I'm thinking of just cutting my loses.

yachtheli · 01-13-2013, 10:42 PM

I should mention, I tried using a m2 bottoming tap to clean out the threads. But some of the inserts are set crooked in the plastic so the screws all go in at random angles. Shame MS-Heli! Shame on you...

matt-snitters · 01-14-2013, 06:47 AM

I got a spare set of servo frames when I brought mine. One of the frames in the kit had a hole out of alignment so I used one of the spares. Sounds like you've been unlucky

Sao · 01-14-2013, 07:27 AM

I just took a screw and used it like a tap winding it in a bit then back out a bit until the threads were better. I'd expect this from a cheap clone kit but not from MSH. That said when you do get it built you will love it

CrashAddict · 01-15-2013, 08:22 AM

What is strange is that the same tech is used in the 3rd bearing support as well as the Y bracket, plastic frames parts etc and they don;t have issues. Why just the bearing / servo blocks? Its not just plastic in there, the inserts are crappy. And it has that cheap ass alluminum with sand in it feel when you are tapping it.

Dogga · 01-20-2013, 10:39 PM

I am officially disgusted in this kit. So now I have had to get replacement servo frames, the bushing was too big to fit through the tail guide pulley so had to get another pulley (another common problem apparently). Finally received my new pulley which was good. Moved on to build the next part and one of the tail plastic rods is missing from the pack.... So another damn part, feels like each step of the build something is wrong or missing. So awful for a 'quality helicopter'

rossk · 01-21-2013, 05:10 AM

I have built 4 mini protos and I have not had one of the problems you guys are having, either things are slipping badly at MSH or you are unlucky...

12-09-2012, 10:53 AM	#22
yachtheli Registered Users Thread Starter Join Date: Jan 2010 Location: south florida	just added some pics to the original post.. __________________ Logo 553 chopped 8FG Super

12-10-2012, 11:26 PM	#23
eder0022 Registered Users My HF Map location Join Date: Oct 2012 Location: Duluth, MN	I found the culprit... __________________ Nano CPX, Align 250 SE, Tarot 450 V2 FBL, Specktrum DX6i

12-17-2012, 08:21 PM	#24
yachtheli Registered Users Thread Starter Join Date: Jan 2010 Location: south florida	Update. Readyheli is not stocking MSH anymore so they refunded me. Helidirect sent me a replacement set of servo frames and they are just like the first two sets, maybe even worse. So my build is still on hold __________________ Logo 553 chopped 8FG Super

12-17-2012, 08:25 PM	#25
yachtheli Registered Users Thread Starter Join Date: Jan 2010 Location: south florida	The CNC servo frames are simply no where to be found. Out of stock everywhere... __________________ Logo 553 chopped 8FG Super

12-18-2012, 12:09 PM	#26
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	Couple more weeks. MSH says a couple more weeks they should be stock. __________________ Mini Prôtos 6S Stretch - DS95/DS95i, Mini V-Bar, YGE60 VBAR Ready

12-08-2012, 01:52 PM	#21
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	Yeah, those vendors are good. The 3rd bearing support and plastic frame parts have the same type of insert but I dont see any issues with those.

01-05-2013, 04:57 PM	#27
yachtheli Registered Users Thread Starter Join Date: Jan 2010 Location: south florida	Still no stock on the cnc frames that I don't even really want to buy. This kit has been a waste of money at this point. I can't believe more people are not speaking up about the crap parts in the kit... __________________ Logo 553 chopped 8FG Super

01-05-2013, 06:29 PM	#28
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	I feel bad.. I have 4 of the CNC frames just sitting here. 2 for my new kit and 2 spares :-) Well, I don't feel that bad. I imagine from the time they run out to the time they get more can be made longer by the Christmas break. __________________ Mini Prôtos 6S Stretch - DS95/DS95i, Mini V-Bar, YGE60 VBAR Ready

01-10-2013, 11:55 PM	#29
Dogga Registered Users Join Date: Aug 2012 Location: Cairns, QLD Australia	Well doing my Mini Protos and I have come across the same issue.... yay......... so excited to build this over the weekend now I can't do anything!!! So annoying!!! Now I have to wait until the middle of next week until an M2 thread tap gets here as no one in my area stocks this size..... There goes half of my next week that I have off work just waiting for this thing..... ARGH! __________________ Futaba T8FG Super Mini Prôtos - Low FBL Hub, MKS DS95i, KDS N300 (MKS DS95 clones) cyclic, Skookum SK540, YGE 60, Scorpion 2580KV, Revolectrix 3S 2200 Phoenix Simulator

01-11-2013, 08:15 AM	#30
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	M2 Tap.. I ran a tap through mine. The temptation is to tap it out all the way through. You risk damaging the tap, running the hole off center if you do that. You need a bottoming tap to do it right. __________________ Mini Prôtos 6S Stretch - DS95/DS95i, Mini V-Bar, YGE60 VBAR Ready

01-11-2013, 11:27 AM	#31
matt-snitters Registered Users Join Date: May 2012 Location: England	I collect mine tomorrow. Hope mine isn't the same!!

01-11-2013, 02:16 PM	#32
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	Probably will be. Collect a new 2mm tap anyways. It comes in handy. __________________ Mini Prôtos 6S Stretch - DS95/DS95i, Mini V-Bar, YGE60 VBAR Ready

01-11-2013, 04:54 PM	#33
Dogga Registered Users Join Date: Aug 2012 Location: Cairns, QLD Australia	problems bearing blocks/ servo frames?? Pics added.. Yeah I ordered a bottoming tap __________________ Futaba T8FG Super Mini Prôtos - Low FBL Hub, MKS DS95i, KDS N300 (MKS DS95 clones) cyclic, Skookum SK540, YGE 60, Scorpion 2580KV, Revolectrix 3S 2200 Phoenix Simulator

01-13-2013, 10:42 PM	#35
yachtheli Registered Users Thread Starter Join Date: Jan 2010 Location: south florida	I should mention, I tried using a m2 bottoming tap to clean out the threads. But some of the inserts are set crooked in the plastic so the screws all go in at random angles. Shame MS-Heli! Shame on you... __________________ Logo 553 chopped 8FG Super

01-14-2013, 06:47 AM	#36
matt-snitters Registered Users Join Date: May 2012 Location: England	problems bearing blocks/ servo frames?? Pics added.. I got a spare set of servo frames when I brought mine. One of the frames in the kit had a hole out of alignment so I used one of the spares. Sounds like you've been unlucky

01-14-2013, 07:27 AM	#37
Sao Registered Users Join Date: Apr 2004 Location: UK, Beds	I just took a screw and used it like a tap winding it in a bit then back out a bit until the threads were better. I'd expect this from a cheap clone kit but not from MSH. That said when you do get it built you will love it __________________ Goblin 700 V-Bar, Logo 500SE V-Bar, MSH Mini Protos V-Bar, T-Rex 500 V-Bar, E-Flite Blade 130X A few planks

01-15-2013, 08:22 AM	#38
CrashAddict Registered Users Join Date: Sep 2012 Location: Danbury CT USA	Weird What is strange is that the same tech is used in the 3rd bearing support as well as the Y bracket, plastic frames parts etc and they don;t have issues. Why just the bearing / servo blocks? Its not just plastic in there, the inserts are crappy. And it has that cheap ass alluminum with sand in it feel when you are tapping it. __________________ Mini Prôtos 6S Stretch - DS95/DS95i, Mini V-Bar, YGE60 VBAR Ready

01-20-2013, 10:39 PM	#39
Dogga Registered Users Join Date: Aug 2012 Location: Cairns, QLD Australia	I am officially disgusted in this kit. So now I have had to get replacement servo frames, the bushing was too big to fit through the tail guide pulley so had to get another pulley (another common problem apparently). Finally received my new pulley which was good. Moved on to build the next part and one of the tail plastic rods is missing from the pack.... So another damn part, feels like each step of the build something is wrong or missing. So awful for a 'quality helicopter' __________________ Futaba T8FG Super Mini Prôtos - Low FBL Hub, MKS DS95i, KDS N300 (MKS DS95 clones) cyclic, Skookum SK540, YGE 60, Scorpion 2580KV, Revolectrix 3S 2200 Phoenix Simulator

01-21-2013, 05:10 AM	#40
rossk Registered Users Join Date: Mar 2012 Location: Australia	I have built 4 mini protos and I have not had one of the problems you guys are having, either things are slipping badly at MSH or you are unlucky... __________________ Minicopter Diabolo - Kosmik 200 Cool, Pyro 800 Comp MA Whiplash - Kosmik 200, Pyro 700 Protos500Stretch-YGE90+3226-900 Protos500-YGE80+MVVS950 ProtosMiniStretch-YGE60+2025-1360 MSH Brain Spektrum DX8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode