Main Gear/Shaft glue?

What · 12-18-2012, 04:16 PM

When I bought it new there was some black "glue" on the main shaft under the main gear.
To keep the main gear in corret position.

Can you buy this any where?

Thanks!

jbilliter · 12-18-2012, 08:15 PM

I think it is very similar to Liquid Tape, available at Home Depot and probably similar stores. Liquid tape works well because I have to scrape some of it off when I do want to remove the gear.

kingmeow · 12-18-2012, 08:17 PM

You can use a bunch of stuff for that:

Caulking (latex or silicone, any color)
Goop (or Shoe Goo or whatever they call it now a days)
Elmer's white glue (or Carpenter's yellow)
Hot glue gun

There's really nothing special about the black factory stuff.

ElektroTrainerS · 12-20-2012, 04:55 PM

Hi,
after installing the AD Mild Kit I haven´t glued the main gear. It works

captdave221 · 12-21-2012, 11:09 AM

So a drop of thin CA I used was a bad idea?

mtwarych3@msn.com · 12-21-2012, 01:42 PM

I cannot say whether it works on helis, but bees wax is a superb adhesive for non permanent joints. R/C 56 was desighned to glue canopies onto R/C aircraft only drying to a high tach non permanent bond. With my helis i would use bees wax. Good luck.
JW

kingmeow · 12-21-2012, 08:29 PM

Quote:

Originally Posted by captdave221

So a drop of thin CA I used was a bad idea?

I don't think so but the other recommended "adhesives" are easier to remove in the further if need be.

tchilds · 12-21-2012, 09:46 PM

I CA my main gear on too. It works fine and comes apart too just fine.

The gear fits fine with no glue. I think the reason they put that dab on there is to balance the main shaft, not to hold the gear on. The main shaft in the nano is perfectly balanced except for the main gear's flat. The rubber would solve this.

I've had metal parts completely demonlished by something that was out of round before in the rotating assembly. Balance is nice even though not necessary.

12-18-2012, 04:16 PM	#1
What Registered Users Join Date: Nov 2012 Location: Norway	Main Gear/Shaft glue? When I bought it new there was some black "glue" on the main shaft under the main gear. To keep the main gear in corret position. Can you buy this any where? Thanks!

12-18-2012, 08:15 PM	#2
jbilliter Registered Users Join Date: Feb 2012 Location: Columbus, OH	I think it is very similar to Liquid Tape, available at Home Depot and probably similar stores. Liquid tape works well because I have to scrape some of it off when I do want to remove the gear. __________________ NCPx+ Mild BL, MCPx, EXI 450 pro, HK250GT/BladeSR, MSR, DX6i

12-18-2012, 08:17 PM	#3
kingmeow Registered Users Join Date: Jul 2011 Location: NJ	You can use a bunch of stuff for that: Caulking (latex or silicone, any color) Goop (or Shoe Goo or whatever they call it now a days) Elmer's white glue (or Carpenter's yellow) Hot glue gun There's really nothing special about the black factory stuff.

12-21-2012, 01:42 PM	#6
mtwarych3@msn.com Registered Users Join Date: Aug 2012 Location: Montana	Bees wax or R/C56 I cannot say whether it works on helis, but bees wax is a superb adhesive for non permanent joints. R/C 56 was desighned to glue canopies onto R/C aircraft only drying to a high tach non permanent bond. With my helis i would use bees wax. Good luck. JW

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2012, 04:55 PM	#4
ElektroTrainerS Registered Users Join Date: Aug 2011 Location: Germany	Hi, after installing the AD Mild Kit I haven´t glued the main gear. It works

12-21-2012, 11:09 AM	#5
captdave221 Registered Users My HF Map location Join Date: Dec 2009 Location: bellebille, illinois	So a drop of thin CA I used was a bad idea?

12-21-2012, 09:46 PM	#8
tchilds Registered Users Join Date: May 2012 Location: Indy	I CA my main gear on too. It works fine and comes apart too just fine. The gear fits fine with no glue. I think the reason they put that dab on there is to balance the main shaft, not to hold the gear on. The main shaft in the nano is perfectly balanced except for the main gear's flat. The rubber would solve this. I've had metal parts completely demonlished by something that was out of round before in the rotating assembly. Balance is nice even though not necessary.