Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > nano CP X


nano CP X Blade nano CP X Helicopters Information and Help


Reply
 
Thread Tools Display Modes
Old 12-21-2012, 12:59 PM   #1
Pipes
Registered Users
 

Join Date: Nov 2006
Location: VerdunQuebec, Canada
Default Nano CPX BNF with Spektrum DX8

I would like to purchase a Nano CPX BNF but need to know how to set it up with my Spektrum DX8 with basic settings until I get use to it. Does anyone have all the settings for this radio.I have had othe small Helis but the radios were already factory set.
I have never set up a radio yet so this would be my first try.
Thanks for your help.
__________________
RC Helicoptor Nebie
Pipes is offline        Reply With Quote
Old 12-21-2012, 01:23 PM   #2
NCcraig
Registered Users
 
Posts: 9,422
 

Join Date: Mar 2011
Location: North Carolina
Default

I don't have a DX8 but from what I understand, it has the capability of uploading settings from a memory card. You can also manually set them using the setting in the owners manual.
__________________
Team Newb pilot
Trex 450 Pro V2 (KDE450XF motor,iKON),Trex 500 ESP (KDE500XF motor, iKON), Witespy HT450, Blade 200QX, DX9, AMA# 966513.
NCcraig is offline        Reply With Quote
Old 12-21-2012, 01:25 PM   #3
megawhacker
Registered Users
 

Join Date: Apr 2011
Location: Oregon
Default

Hi,

Your question is as much a DX8 question as a Nano question. It takes a few times through the menus on the DX8 to figure out where everything is. The DX8 manual should be enough to get started.

As far as the nCPx part of the question it is pretty much the same for all the micro helicopters-tone down D/R, expo, and maybe pitch to get a less responsive helicopter.

So, setup your DX8 as shown on page 6 of the nCPx manual. Next is mostly a matter of personal preference-what worked for me with the mCPx was decreasing aileron and elevator D/R to 30% and Expo to zero. Rudder to 70% D/R and zero expo. If you have problems with altitude control maybe reduce max pitch slightly to 90 or 80%.

If this is too tame, maybe bump it up a little-perhaps to 50% D/R with 15% Expo for aileron and elevator.

Again, much is personal preference and no magical one size fits all. What is important is that you understand which direction of making changes in the transmitter dial up responsiveness and which direction dials it down.
__________________
HELIFREAK-where the signal to noise ratio varies minute to minute.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Helifreak number 133542
megawhacker is offline        Reply With Quote
Old 12-22-2012, 10:18 AM   #4
marinr
Registered Users
 

Join Date: May 2012
Location: Louisiana
Default

You can download the nano CPX manual here:

http://www.bladehelis.com/Products/S...LH3380#manuals

Note the instructions for binding.
marinr is offline        Reply With Quote
Old 12-22-2012, 10:55 AM   #5
GSPI
Registered Users
 
Posts: 3,249
 

Join Date: May 2012
Location: CLE
Default

I'll have to pull my DX8 settings out for the Nano.... got to wait until I get back to the workbench though. The Nano manual does have the DX8 settings though.
__________________
Beating the air into submission... one Blade® at a time!
Lynx Heli Innovations Team Pilot
SilentDRC.net -The Order of Brushless Witnesses
GSPI is offline        Reply With Quote
Old 12-22-2012, 04:05 PM   #6
Wolf-Tau
Registered Users
 

Join Date: Aug 2012
Location: El Paso
Default

+1 to Mega.

I was having a hard time with my Nano and now with these setting or some close to
those I'm having a much better time.

WT
__________________
DX6i, Blade MSR, MSRx, MQX, Nano CPX, MCPX, New MCPX BL
Trying out Walkera-Devo10, Super FP, Mini CP, new in the box V120D02S V2 Green
Wolf-Tau is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > nano CP X


nano CP X Blade nano CP X Helicopters Information and Help

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com