Tail gain change when switched to SK Gov.

[shadco]

Mini Protos Sport flying head speed 3100

I got tired of the inconsistency using gov store mode with my YGE so I switched over to the SK Gov.

Good News SK gov works a champ but...

I noticed an oscillating tail wag similar to when I had logging on.

Tail gain was 46 and it was solid without the SK Gov, I dropped it to 36 and it seemed better, then to 30 and it seemed a little better.

30 is the low limit on my TX (T8FG).

Seems I can lock it in the SK settings to a value lower than 30 would that be advised or should I be looking elsewhere for the cause. Tail slider is buttery smooth and end points are spot on.

[neoalchemist74]

I would put your tail gain back up and instead try lowering your gov gain.

[shadco]

Originally Posted by neoalchemist74

I would put your tail gain back up and instead try lowering your gov gain.

You are referring to the gov gain setting in the SK Setup interface using either the 3d or advanced interface view right?

Currently set at 50

[neoalchemist74]

Correct!

[snaaakeey]

Gov gain on electrics seem to be between 25 and 35. 50 + seems to be for nitro.

[shadco]

Originally Posted by snaaakeey

Gov gain on electrics seem to be between 25 and 35. 50 + seems to be for nitro.

Thanks for the tip, I was going to start at 40, now I'll try 30 instead and work from there.

I have the field programmer so it should be fairly easy to dial in.

[shadco]

Originally Posted by shadco

Thanks for the tip, I was going to start at 40, now I'll try 30 instead and work from there.

I have the field programmer so it should be fairly easy to dial in.

Gov gain at 30

Tail gain back up to 46

5 perfect flights today.

[neoalchemist74]