new to FPV question x 2

Bikersurgeon · 12-29-2012, 10:07 PM

greetings!

been flying helis a while. got a BOSCAM FPV goggle and transmitter set. I have searched the web (I am a luddite) and can't find :

1) the BOSCAM has a 6 pin data cable for head tracking that is for a Futaba radio. all my radios are JR...is there some adapter cable available??

2) The BOSCAM came with a cable that goes from the video transmitter box to the actual camera...on the camera side there is a small white connector that plugs in to the camera, and one wire was broken...the connector looks like one that would be used for a JR satellite receiver EXCEPT it has four pin holes instead of three. I am looking for either a replacement cable (the other end has a wide (6 pin I think with 3 wires entrering it) or at least the name of the small (4 pin) connector so I can make my own cable. Thanks in advance!

Bikersurgeon · 01-07-2013, 08:47 PM

Got issue 2 resolved with some snipping, soldering, and hot glue insulation application. Question 1 remains: the Boscam goggles have a cable that has a 6 pin plug on one end that is supposed to plug into a futaba radio (the goggles have a gyro that operates pan/tilt servos on the camera), but I have a JR x9303...do I have to buy a Futaba heli radio or is there an adapter cable that will allow this to work with the JR? Thanks!

12-29-2012, 10:07 PM	#1
Bikersurgeon Registered Users My HF Map location Join Date: Dec 2011 Location: southwest missouri	new to FPV question x 2 greetings! been flying helis a while. got a BOSCAM FPV goggle and transmitter set. I have searched the web (I am a luddite) and can't find : 1) the BOSCAM has a 6 pin data cable for head tracking that is for a Futaba radio. all my radios are JR...is there some adapter cable available?? 2) The BOSCAM came with a cable that goes from the video transmitter box to the actual camera...on the camera side there is a small white connector that plugs in to the camera, and one wire was broken...the connector looks like one that would be used for a JR satellite receiver EXCEPT it has four pin holes instead of three. I am looking for either a replacement cable (the other end has a wide (6 pin I think with 3 wires entrering it) or at least the name of the small (4 pin) connector so I can make my own cable. Thanks in advance! __________________ Approach engineering .50 apache, TT Raptor .90 TOW MD500, 2 x JR ergo 60, TT x50 titan, TT raptor 50, TT raptor 30, 2 x Mini titan e325, Trex450 sport, trex 450 Apache, mini Titan cobra, Airwolf 450, Blade 400, blade sr, blade Mcpx, airhog helix

01-07-2013, 08:47 PM	#2
Bikersurgeon Registered Users Thread Starter My HF Map location Join Date: Dec 2011 Location: southwest missouri	Got issue 2 resolved with some snipping, soldering, and hot glue insulation application. Question 1 remains: the Boscam goggles have a cable that has a 6 pin plug on one end that is supposed to plug into a futaba radio (the goggles have a gyro that operates pan/tilt servos on the camera), but I have a JR x9303...do I have to buy a Futaba heli radio or is there an adapter cable that will allow this to work with the JR? Thanks! __________________ Approach engineering .50 apache, TT Raptor .90 TOW MD500, 2 x JR ergo 60, TT x50 titan, TT raptor 50, TT raptor 30, 2 x Mini titan e325, Trex450 sport, trex 450 Apache, mini Titan cobra, Airwolf 450, Blade 400, blade sr, blade Mcpx, airhog helix

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode