START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Flybarless Helicopter Systems CSM Cyclock, Helitronix Multi-mixer, Spartan AP2000i, Firmtronix Digimix-3, Gyrobot, SK360and AC3X |
|
LinkBack | Thread Tools | Display Modes |
08-20-2012, 11:10 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2009
|
"Servo Type" for the ZYX?
One of the settings is the servo type. I am going to be using some Savox SH-0257MG servos, which number is what Tarot calls the servo type? None of the numbers match the options in the manual.
Thanks http://www.savoxusa.com/Savox_SH0257...avsh0257mg.htm Dimensions(mm): 22.8X12.0X25.4 Weight(g): 14.0 Speed(@4.8V sec/60): .13 Torque(@4.8V oz-in): 25.0 Speed(@6.0V sec/60): .09 Torque(@6.0V oz-in): 30.6 Gear: Metal Bearing: 1BB Case: Aluminum Running current (at no load): 150 mA @ 4.8V Running current (at no load): 180 mA @ 6.0V Stall current (at locked): 1000 mA @ 4.8V Stall current (at locked): 1200 mA @ 6.0V Idle current (at stopped): 5 mA @ 4.8V Idle current (at stopped): 5 mA @ 6.0V Limit angle: 220°±10° Connector wire gauge: #26 AWG Connector wire length: 250 ±5 mm Horn gear spline: 21T Control system: Pulse width modification Amplifier type: Digital Controller Operating Travel: 90° (when1000→2000 μsec) Neutral position: 1500 μsec Dead band width: 5 μsec Rotating direction: Clockwise (when1500→2000 μsec) Pulse width range: 700→2300 μsec Maximum travel: Approx 150°(when700→2300 μsec)
__________________
Gaui Hurricane w/ 530mm blades & Robird G31 Walkera Super CP Walkera Devo 10 w/ Deviation |
Sponsored Links | |||
Advertisement |
|
08-20-2012, 11:42 AM | #2 (permalink) |
Registered Users
|
1520 digital...assuming you have a good digital tail servo too.
I suggest using John Z's software, more info, less chinglish and good support. http://fbl.net.nz/ Cheers, Ken
__________________
Sigma, MCX, MSR, BOL, B400 BSR, EXI 450 Pro FBL, mCPX Align 500ESP FBL AXN FPV |
Thread Tools | |
Display Modes | |
|
|