Lynx Trex 600 metal Fan

[ViBuilt]

Hi All, apologies if this has already been covered.

I heard you can use a lynx trex 600 metal fan on the os37 and will stop the magnets breaking out of the standard plastic fan. A have an align metal 600 fan here but the clutch shoe bolt holes are different, does the lynx come with a clutch sized to fit the nx4 as well, or multiple mounting holes??


cheers

Doug

[u8at711]

My lynx fan bolted up no prob.
I don't own a trex600 so I cannot compare it.

[Glenn Goodlett]

I thought any Trex 600 fan would work. Are you sure yours is for a Trex 600?

[ViBuilt]

here is the Fan i have
holes are bigger thread and slightly further apart also

nx4 clutch only uses 2mm threads vs 3 for trex

[u8at711]

U sure that's not a 700 fan ?

[ViBuilt]

Good Point I gave it to my friend with a 600N to check it against his, good tip thanks

Edit: was definitely a 600 size fan and clutch mounting holes

[ViBuilt]

Im not the brightest lamp on the path.

Of course I am meant to remove the metal fan from the trex 600 hub and attach it to the NX4 hub, then of course it fits, Double DOH!!!!!