Register Now

sebsmash · 11-16-2011, 11:35 PM

Hi guys, I am looking at the Torq servos from outrage and have a couple questions.
What is the best way to power these?
Will a BEC Pro have a high enough output or will the high amp draw require a separate rx pack?
I will be using them with the AR8000 rx.
If it requires a separate rx pack what voltage regulator should I use?
Thanks for your help,
Seb

Slyster · 11-17-2011, 04:28 PM

I would do a subject line search for "torq" in this forum.. I just did and there are 21 threads about these. Probably everything you need to know.

sebsmash · 11-17-2011, 08:04 PM

I must not be looking at the right threads because I can't seem to find any threads about this topic, I'm sure they are out there and I just keep missing them,
I sure would appreciate an answer to my question if anyone has one.
I'll keep searching though.

Slyster · 11-17-2011, 08:36 PM

Here's a few... I don't know the answer myself.. but perhaps in one of these.

Torq servos

TORQ servos

Outrage Torq servo question

Futaba 251 or torq 9188

Trying out a Torq 9188

OUTRAGE TORQ BL9188 & JR G770 Gyro

11-16-2011, 11:35 PM	#1 (permalink)
sebsmash Registered Users My HF Map location Join Date: Jul 2010	Torq servos Hi guys, I am looking at the Torq servos from outrage and have a couple questions. What is the best way to power these? Will a BEC Pro have a high enough output or will the high amp draw require a separate rx pack? I will be using them with the AR8000 rx. If it requires a separate rx pack what voltage regulator should I use? Thanks for your help, Seb __________________ Trex 600 - Scorpion HK-4025-890kv 8s, microbeast Align 250, tarot FBL controller Align 800 (not actually mine) for research into autonomous flight Spektrum Dx7s

11-17-2011, 04:28 PM	#2 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	I would do a subject line search for "torq" in this forum.. I just did and there are 21 threads about these. Probably everything you need to know. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

11-17-2011, 08:04 PM	#3 (permalink)
sebsmash Registered Users Thread Starter My HF Map location Join Date: Jul 2010	I must not be looking at the right threads because I can't seem to find any threads about this topic, I'm sure they are out there and I just keep missing them, I sure would appreciate an answer to my question if anyone has one. I'll keep searching though. __________________ Trex 600 - Scorpion HK-4025-890kv 8s, microbeast Align 250, tarot FBL controller Align 800 (not actually mine) for research into autonomous flight Spektrum Dx7s

11-17-2011, 08:36 PM	#4 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	Here's a few... I don't know the answer myself.. but perhaps in one of these. Torq servos TORQ servos Outrage Torq servo question Futaba 251 or torq 9188 Trying out a Torq 9188 OUTRAGE TORQ BL9188 & JR G770 Gyro __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in