Hobbywireless txv582 can't connect.

[Vaeloron]

I just got a plug and play set from hobbywirelesd.com and I can't get it to connect on any channel. I can't tell if its a transmitter, receiver, or camera issue. Its the txv582 transmitter, r5800x receiver and v9 sub micro camera. The setup appears pretty straight forward so I don't think I am doing anything wrong. Only thing I am unsure of is if the shrink wrap is supposed to stay on or not. I don't think it would make a difference. Any help would be appreciated.

Sent from my SCH-I605 using Tapatalk 2

[Vaeloron]

I finally got it working. It seems it will not run on a 3s lipo even though the information says it should. I was able to get it to work on 2s. I am wondering if I got the right camera as it seems the camera itself is getting really hot. The camera that should have come with it would be rated at 3.6-12 volts but I suspect I may have been sent the 5 volt version which would explain the heat and why it wouldn't work on 3s.

Sent from my SCH-I605 using Tapatalk 2