P. Mix for throttle channel

[dkpodder]

Hi.

I'm playing arround with the 18'mz p.mix, but can't seem to work this one out.

What I want is to overrule the throttle channel by a switch, and set the positions.

Eg:
Switch C up: Mix inactive, throttle follows the throttle curve
Switch C mid: Throttle output +40% no matter what the throttle curve says
Switch C down: Throttle output +100% no matter what the throttle curve says

I've found this vid showing the 7C, and it seems he makes a throttle hold for acro, using a P. Mix. All I want to do, is add my desired throttle position related to switch position: [ame]http://www.youtube.com/watch?v=Btdglv4qUnE[/ame]

No matter what settings I use in the P. Mix or Offset mixing, the settings/curve is added to the current throttle curve output, but I want to overrule it.

Has anyone found a way to do this ?

[DemonHeli]

Are you trying to use the C switch to disable the stick when you set the switch? Seems like something you would do by setting a custom condition. I have my throttle with 3 different curves setup on a switch but didn't think about using a condition to move from stick to switch. Is that what you are trying to do?

[dkpodder]

Hi, and thank you for your reply.

Yes, that could be a solution.

Hoped to be able to use a mix for this, but will try the condition solution you suggested, and a logical switch to choose condition.

[DemonHeli]

Yes, I ungrouped my throttle and created a custom curve for each switch position. I haven't tried but I think if you can select the switch and the "on" position for each curve then why can't you select a different switch (the stick) for one of the throttle curves.

Not sure if this is possible with my DX4e???

[dkpodder]

Ok, i've managed to set it up using separete conditions and logical switches.

Think it's the second best solution, cause I need one condition per Gov setting.

Hoped to have a p. mix. override the throttle output. Then I didn't need that many conditions (Norm, Idle 1, Idle 2, Gov 1, Gov 2, Gov 3, Hold)