Register Now

vertico · 07-17-2013, 04:47 PM

I have been asking a lot of questions on here lately :-)
This guy is so little, where has everyone chosen to ground their pushglo type device?
I'm new to nitro but not to grounding. I'm having an hard time convincing myself which ground spot is in the best location to connect to.

vertico · 07-17-2013, 07:27 PM

I just spent some time looking through the photos section. It appears most people are attaching the ground to the lower bolt of the engine mount on the right side of the engine.

Rollin_3z · 07-17-2013, 08:35 PM

Backplate screws or carb screw. .

Bigugly · 07-17-2013, 08:59 PM

Ive been putting mine on the back plate screws.

vertico · 07-17-2013, 09:16 PM

I just hooked mine into the motor mount screw that I mention. Once I get a heli going and get familiar with it I always go back and redo the wiring because...well i don't know why I do that but when I do i'll probably move it to the backplate screw.

When I was in the process of screwing it into the motor mount screw I dropped the screw and it fell through the heli, I was like oh boy good thing I'm working on top of my rubber work mat. I picked up the heli, no screw! I shook the heli a little and it was rattling around in the engine shroud! It took me a good 10 minutes to get it out!

Roger Palacio · 08-01-2013, 07:47 AM

I installed mine on the engine mount too, it works perfect

07-17-2013, 04:47 PM	#1 (permalink)
vertico Registered Users Join Date: Jul 2011 Location: Colorado Springs	Grounding pushglo I have been asking a lot of questions on here lately :-) This guy is so little, where has everyone chosen to ground their pushglo type device? I'm new to nitro but not to grounding. I'm having an hard time convincing myself which ground spot is in the best location to connect to. __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

07-17-2013, 07:27 PM	#2 (permalink)
vertico Registered Users Thread Starter Join Date: Jul 2011 Location: Colorado Springs	I just spent some time looking through the photos section. It appears most people are attaching the ground to the lower bolt of the engine mount on the right side of the engine. __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

07-17-2013, 08:35 PM	#3 (permalink)
Rollin_3z Registered Users Join Date: Jan 2009	Backplate screws or carb screw. . __________________ Minion Mini Quad 4S / Mini Talon V-tail Drone / Micro H Quad on Taranis FPV

07-17-2013, 09:16 PM	#5 (permalink)
vertico Registered Users Thread Starter Join Date: Jul 2011 Location: Colorado Springs	I just hooked mine into the motor mount screw that I mention. Once I get a heli going and get familiar with it I always go back and redo the wiring because...well i don't know why I do that but when I do i'll probably move it to the backplate screw. When I was in the process of screwing it into the motor mount screw I dropped the screw and it fell through the heli, I was like oh boy good thing I'm working on top of my rubber work mat. I picked up the heli, no screw! I shook the heli a little and it was rattling around in the engine shroud! It took me a good 10 minutes to get it out! __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

08-01-2013, 07:47 AM	#6 (permalink)
Roger Palacio Registered Users Join Date: May 2008	I installed mine on the engine mount too, it works perfect __________________ Align T-Rex Family Owner - MicrobeastX - 7200BX 450 Dominator, 500 Dominator, 500(Airwolf) Four Blades, 550 DFC, 600N DFC OS55HZ, 700N DFC 105HZ-R, 700 DFC HK4525-520LE

07-17-2013, 08:59 PM	#4 (permalink)
Bigugly Registered Users Join Date: Mar 2008	Ive been putting mine on the back plate screws.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in