who is running 12s

[daveiga2005]

I want to run 12s.i would like to try running the gov on the icehv 80.watt pinion are you running i watt the get 1900 2100 2300 in my flight modes.thanks for any input

[dhawks]

I'm running 12s with the 15T pinion, but I'm using 500KV motor. I'm using the ICE2 HV80 speed controller in gov mode.

Dennis

[daveiga2005]

I never used a gov before.will the headspeed be to high with out the gov.I'm going to take it for its first flight after work I'll be running a low headspeed till i decide if I want to use the gov.watt headspeed are you running in gov.thanks for any input to this

[dhawks]

2100 according to the calculator,but I've never put a tach on it.

[ghenders]

I am using a 700mx 510kv on 12s and a Ice2 120hv ESC. I am using the gov function with RPM's set a IU1- 2000rpm and IU2-2175rpm. Per the calculator in the castle creations link software, 2200rpm has too little headroom utilizing the stock 15-tooth pinion. To be honest, at 2000rpm this heli flies very nice with very authoritative pitch pumps. I really don't see a need to mess with the pinion at this point.

[raiden83]

Im using it with 2x2650 pack in serial and align 600mx 510kv with ice80hv. Performance is good for me im not 3d pilot

[DavidTan]

Im running 12s1P with Quantum 560KV motor and 13 tooth. HS is about 2100 at 85% for phase sensor governor. Batteries are warm not hot with consistent power thru 3-4 mins.