Any New Revisions On The SK540

[j.avant]

My heli has been setting for a few months so I'm wondering if there is any new updates for the 540? I think i have 3.15 now.

John

[demon1300]

Not trying to be nasty or anything but don't you think maybe going here would have answered your question

http://www.skookumrobotics.com/updates/

[thefrog]

Nope, nothing yet.

[j.avant]

Originally Posted by demon1300

Not trying to be nasty or anything but don't you think maybe going here would have answered your question

http://www.skookumrobotics.com/updates/

Probably would have. But there may be some new info on the 540 that Mr. Georgi would know about. That's why i like asking here. Like the change in the mounting foam/pad/tape.

Thanks though.

John

[j.avant]

Originally Posted by thefrog

Nope, nothing yet.

Thanks @ thefrog.

John

[RC Mike]

Originally Posted by j.avant

My heli has been setting for a few months so I'm wondering if there is any new updates for the 540? I think i have 3.15 now.

John

The only complaint I have with the current version is that the EP governor could be better.
　
Skookum takes a year plus to get an update out. I think that they only have one guy doing firmware for all their products. Last was August 2011 so it will probably be next summer.
　
　
.

[georgi UK]

=] John, it's all about the gps release currently, the 540 is working magnificently, just needs the odd tweak here and there.

anything specific on your mind?

[j.avant]

Originally Posted by georgi UK

=] John, it's all about the gps release currently, the 540 is working magnificently, just needs the odd tweak here and there.

anything specific on your mind?

Georgi.....My heli set for a few months. I took it out the other day and i have a head wobble now, that i didn't have when i set it up. I'm hopping that the dampners are the problem, don't really know.

When i took it out the other day i had a problem with one of the servos not working after initialization. I had to reinitialize the 540 again to get it to work. Any thoughts?

Thanks, John

[georgi UK]

Originally Posted by j.avant

Georgi.....My heli set for a few months. I took it out the other day and i have a head wobble now, that i didn't have when i set it up. I'm hopping that the dampners are the problem, don't really know.

When i took it out the other day i had a problem with one of the servos not working after initialization. I had to reinitialize the 540 again to get it to work. Any thoughts?

Thanks, John

=] John, dampers deformed deteriorated? I have had a dead tail servo at initialize which worked fine after a re-boot, hook up to the pc and check the live data for peace of mind!

[j.avant]

Originally Posted by georgi UK

=] John, dampers deformed deteriorated? I have had a dead tail servo at initialize which worked fine after a re-boot, hook up to the pc and check the live data for peace of mind!

I have some new dampers coming. That's what i thought, dampers.

I wasn't to concerned about the servo, all cyclic's are new.

Thanks Georgi.

John