Register Now

XPair · 09-04-2014, 02:29 PM

If any one can help I would greatly appreciate it...

I flew my Blade 4503d the other morning and went to fly later that evening and I've got problems!?!

Power up and do a preflight servo check and my pit and aile are not moving when I more the stick left or right. If i apply throttle they work with the swash mix. I have checked and double checked my settings to see if something got moved.I even tried rebinding and tried another receiver.,. But no luck.

Does any body know what Im missing??? I need to practice..

b_vanfossen · 09-04-2014, 08:26 PM

I wish I had an answer for you. You will have better luck posting in the spectrum help section. Good luck

Sent from my iPad using Tapatalk

Russell Harding · 09-04-2014, 09:05 PM

Try reprogramming from a fresh model memory.

The DX6i is known to overwrite/copy settings from other models. I've had this happen specifically when the batteries are loose and the Tx resets without the 'shutting down' message.

Crashkopter · 09-14-2014, 10:27 AM

I left mine on one time by accident and when the batteries ran out, all my settings were lost!!

09-04-2014, 02:29 PM	#1 (permalink)
XPair Registered Users Join Date: Aug 2014	DX6i Help needed PLEASE!!! If any one can help I would greatly appreciate it... I flew my Blade 4503d the other morning and went to fly later that evening and I've got problems!?! Power up and do a preflight servo check and my pit and aile are not moving when I more the stick left or right. If i apply throttle they work with the swash mix. I have checked and double checked my settings to see if something got moved.I even tried rebinding and tried another receiver.,. But no luck. Does any body know what Im missing??? I need to practice..

09-04-2014, 08:26 PM	#2 (permalink)
b_vanfossen Registered Users Join Date: Mar 2007	I wish I had an answer for you. You will have better luck posting in the spectrum help section. Good luck Sent from my iPad using Tapatalk __________________ Brian

09-14-2014, 10:27 AM	#4 (permalink)
Crashkopter Registered Users Join Date: Dec 2012	DX6i I left mine on one time by accident and when the batteries ran out, all my settings were lost!! __________________ Align Trex 600N, Trex 450 Pro Eflite Blades 400, mCPx, Nano CPx, mSR, CX2 and mCX Spektrum DX7s and DX6i

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-04-2014, 09:05 PM	#3 (permalink)
Russell Harding Registered Users Join Date: Jan 2013	Try reprogramming from a fresh model memory. The DX6i is known to overwrite/copy settings from other models. I've had this happen specifically when the batteries are loose and the Tx resets without the 'shutting down' message.

Register Now

Log-in