START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
4G3 Walkera 4G3 Helicopter Support |
|
LinkBack | Thread Tools | Display Modes |
01-08-2011, 04:34 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2011
|
novus cp / 4g3 dual brushless setup questions
Anyone able to post a couple pics of how they setup their chassis with the dual esc's required for dual brushless upgrades? I'm having a ton of trouble getting it all into the canopy.
Second question is what you hooked the Y adaptor up to? the main motor esc power & tail esc power? or the old power and the tail power? i'm guessing its the first but just wanted to be sure. Thanks!! Running a novus cp with the main and tail motor upgrades to brushless... Not yet using 20c but plan to... |
Sponsored Links | |||
Advertisement |
|
01-09-2011, 10:30 AM | #2 (permalink) |
Registered Users
Join Date: Sep 2008
|
Best to throw the Y adaptor away as too many of these plugs saps too much power. If you do use it, plug both main and tail esc into it. The receiver gets it's power from the main esc.
Ideally, you should connect the lipo to the main esc, and solder the tail esc power wires to the power wire terminals on the main esc. It's much easier to get the stock canopy on, if you make new holes a bit further back Dusty
__________________
Blade 400, mSR, mCPX - Sonix SX450SE - Walkera 1#A, 4#3, 4#3A, 4#3B, 4G3 |
Tags |
4g3, dual brushless, novus cp |
Thread Tools | |
Display Modes | |
|
|