Register Now

HSC · 09-13-2008, 10:14 AM

Hallo !

I have fly R90 with BLS 351 futaba servo on pich.

I have few glitches and blackouts with this servo so I decide to change it !

Before I have fly combination of 2 servos 9202 futaba and newr have a problems with this ( only the servo speed was way too slow )

Wich servo you recomend for pich on R90 ?

My flight stile is hard 3D.

Regards HSC

Badger50 · 09-14-2008, 03:40 PM

Hey there HSC. I fly a raptor 90 3D and do some fairly hard 3D and have had no difficulty with using a Futaba 9351:

S9351 High-Torque

FUTM0236VoltsTorqueSpeed4.8V153.0 oz-in.0.16 sec/60°6.0V192.0 oz-in.0.13 sec/60°

DimensionsWeight1.6 x 0.8 x 1.5 in. 2.0 oz.
I am only running 5.4 volts through a duralite regulator, and it works just fine for me. Hope you find what you want

JimLerch · 09-15-2008, 12:57 AM

Futaba 9252 or the 9454, both are nice and cost ~85.

Also, Hi Tech HS6975 is a high torque / high speed servo for about the same price.

I fly the 9252 on my R60/90 FrankenKopter, really happy with it.

nellie7532 · 09-25-2008, 08:14 AM

Hi
Can I get some advice on whether mine are ok or not? as I bought it second hand last year so not sure on the reasons for his fittings. I am getting into 3D & intend on doing it hard n fast :-) but at the moment i'm doing flips, rolls, & trying tic tocs & funnels

Throttle = Futaba S3004
Pitch = Futaba S9404
Aileron = Futaba S3305
Elevator = Futaba S3305
I bought the tail setup & went for the GY611 with the Futaba S9256

All opinions gratefully received

Cheers Nellie

09-13-2008, 10:14 AM	#1 (permalink)
HSC Registered Users Join Date: May 2006	Wich servo for pitch R90 ! Hallo ! I have fly R90 with BLS 351 futaba servo on pich. I have few glitches and blackouts with this servo so I decide to change it ! Before I have fly combination of 2 servos 9202 futaba and newr have a problems with this ( only the servo speed was way too slow ) Wich servo you recomend for pich on R90 ? My flight stile is hard 3D. Regards HSC __________________ A je to ?

09-14-2008, 03:40 PM	#2 (permalink)
Badger50 Registered Users My HF Map location Join Date: Oct 2007	Hey there HSC. I fly a raptor 90 3D and do some fairly hard 3D and have had no difficulty with using a Futaba 9351: S9351 High-Torque FUTM0236VoltsTorqueSpeed4.8V153.0 oz-in.0.16 sec/60°6.0V192.0 oz-in.0.13 sec/60°DimensionsWeight1.6 x 0.8 x 1.5 in. 2.0 oz. I am only running 5.4 volts through a duralite regulator, and it works just fine for me. Hope you find what you want __________________ Mike: Rap-90 3D x 2, Rap-50 x 2, Fury 55, Rex-450, Hirobo Squark. *"Depression is nothing more than anger, without enthusiasm"*

09-15-2008, 12:57 AM	#3 (permalink)
JimLerch Registered Users My HF Map location Join Date: Nov 2007	Futaba 9252 or the 9454, both are nice and cost ~85. Also, Hi Tech HS6975 is a high torque / high speed servo for about the same price. I fly the 9252 on my R60/90 FrankenKopter, really happy with it. __________________ James Lerch - Raptor 90, JR Vibe 500E, Gaui 550E, Xcell Razor* (*=On Loan) http://lerch.no-ip.com/atm (My homebuilt telescope site) http://lerch.no-ip.com/ChangFa_Gen (My 15KW generator project) http://www.youtube.com/profile?user=JlerchTampa (my you-tube crash videos) http://lerch.no-ip.com/Hat_Cam ("Hat Cam" for recording flights)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-25-2008, 08:14 AM	#4 (permalink)
nellie7532 Join Date: Sep 2006	Hi Can I get some advice on whether mine are ok or not? as I bought it second hand last year so not sure on the reasons for his fittings. I am getting into 3D & intend on doing it hard n fast :-) but at the moment i'm doing flips, rolls, & trying tic tocs & funnels Throttle = Futaba S3004 Pitch = Futaba S9404 Aileron = Futaba S3305 Elevator = Futaba S3305 I bought the tail setup & went for the GY611 with the Futaba S9256 All opinions gratefully received Cheers Nellie

Register Now

Log-in