What receiver to buy?

[$teve]

Got my new 700e (feeling intimidated about the build) and I'm wanting to run a 2S for my radio and servos. I've got a JR receiver laying around from my X9303, but not wanting to use a BEC. Was thinking about another AR7100R (got one in my Vibe50 directly into a 2S 4200mAh), that way I can go low voltage for the tail servo, but I'm using high voltage cyclic servos on the Vibe.

Going with a Castle HV110 ESC. Got a castle link to program it.

So will I need a BEC between my HV110 and the receiver?

Is the AR7100R overkill because I don't need a rev limiter?

Feeling a little overwhelmed with this build, first flybarless, and big electric.

Thanks

[toddress]

Mate the AR7100 is the perfect choice,i run mine with a 2s lipo through a 6v regulator,that way there is no voltage issue..it is a fuss free setup that works.

[$teve]

Doesn't the AR7100 have a Internal 5.2V 2A regulator for throttle, gear, rudder, and aux 2?
Dual outputs on the throttle and gear channels (regulated to 5.2V and unregulated). Is the regulator really needed? I did buy a CC BEC PRO, wondering if I really need it.

Thanks for the reply, looks like a easy setup.

[toddress]

Originally Posted by $teve

Doesn't the AR7100 have a Internal 5.2V 2A regulator for throttle, gear, rudder, and aux 2?
Dual outputs on the throttle and gear channels (regulated to 5.2V and unregulated). Is the regulator really needed? I did buy a CC BEC PRO, wondering if I really need it.

Thanks for the reply, looks like a easy setup.

that is why i did not buy a BEC Pro,the regulator i bought simply goes inline in between the 2s lipo and the AR7100 and that way i am not getting 7.2v going to my cyclic servos,although some are doing that and getting along ok i thought for a few dollars why not have the security of a steady 6v going too the cyclics.i do not like any of the reports i have read on the BEC pro.

[Evan D]

I'm running the AR7100 with the 2S direct to the receiver, no BEC. Working great so far.

[$teve]

Thanks for the replies, I'll take the BEC PRO back and just get the AR7100.