What's your Goblin Setup Thread

[jhheli]

Originally Posted by jhheli

• Flight Style: Smack 3D /Speed/Technical 3d, and slow Techical 3d
• FBL System: Blue full size vbar 5.2
• Motor: KontroniK 700-52 Black Edition
• Pinion:20t
• Target Headspeed(s): 1700/1850/1950/2000/2100
• ESC: Heli Jive Black Edition
• Governor: KontroniK Mode 4
• BEC: KontroniK intrernal 5.6v
• RX Pack: none
• Cyclic Servos: Bls 255
• Tail Servo: Bls 256
• Main Blades: Sab/Mav G5/ Edge
• Tail Blades: Sab/Edge
• Lipos: TP 4400 65c 12s
• Anything else:

I forgot 5.6v on the internal bec.

[Tohtori R]

Originally Posted by Tohtori R

i have all these parts waiting on my desk except main batteries (i want them to be fresh)

Flight Style: Smooth 3D, Smack 3D, Speed
FBL System: mini-V-Bar 5.2 Pro
Motor: Scorpion 4525-520LE
Pinion: 21-22?
Target Headspeed(s): 2000-2250
ESC: HeliJive HV 120+
Governor: V-Bar with modified Hyperion phase sensor
BEC: WR Hercules Super Bec
RX Pack: small 350mAh 2S (45-90C) pack for safety
Cyclic Servos: Outrage Torq BL9180
Tail Servo: Outrage Torq BL9088
Main Blades: i try the stock ones that come with the kit
Tail Blades: also stock
Lipos: TP65C series @ 12S
Anything else:

That mini v-bar is now in my trex500 and i have a full size v-bar for goblin more simple wiring

[Breezyjr]

• Flight Style: Newbie, still perfecting his hover....
• FBL System: HC3-SX, or Vbar, or GT-5
• Motor: Scorpion 4525 LE 520Kv or Possibly Pyro 700-52
• Pinion: Whatever comes with it....
• Target Headspeed(s): ??? Whatever makes it fly... 1600-2000
• ESC: Jive 80HV, or YGE 160
• Governor: ESC
• BEC: WR super BEC or Gryphon Hyper BEC
• RX Pack: none
• Cyclic Servos: JR 8717-HV
• Tail Servo: BLS-256HV
• Main Blades: Stock if they come with the kit, or Radix 710s
• Tail Blades: Stock or V-blades, or Edge, or Radix (whatever I have around)
• Lipos: Voltz 65c 5100 6s x2, TP 45c 4400 x2
• Anything else: got in the first batch, so get my name on canopy. I just can't wait to build this...

Yippee!
Joe_Breezy

[Magneto]

• Flight Style: 3D, Bigsky, Speed
• FBL System: VBar
• Motor: Kontronik Black ed. Pyro 700-52
• Pinion: 20
• Target Headspeed(s): 1600-2200
• ESC: Kontronik Helijive Black ed.
• Governor:VBar
• BEC: Kontronik @ 6v
• RX Pack: S bus R6203sb
• Cyclic Servos: BLS 255s
• Tail Servo: BLS-256HV
• Main Blades: stock
• Tail Blades: stock Lipos: TP 4400s
• Anything else:

[jamin_00]

• Flight Style: Sport / Big Sky / Speed
• FBL System: Vbar 5.2
• Motor: Scorpion 4525 520LE
• Pinion: Stock
• Target Headspeed(s): 1950 ish, will play with this
• ESC: Kontronik Jive 120HV
• Governor: Jive
• BEC: Jive internal
• RX Pack: N/A
• Cyclic Servos: Futaba BLS253 or JR8717
• Tail Servo: Futaba BLS254
• Main Blades: Radix 710FBL
• Tail Blades: Radix 105's/110
• Lipos: 12s Optipower/ possible Thunder Power G6 65c 5000's
• Anything else: Nope, gonna rock as is

[JamesGreen]

[*]Flight Style: Sport / Big Sky / Speed[*]FBL System: Full size Vbar 5.2[*]Motor: Scorpion 4525 520LE[*]Pinion: Stock[*]Target Headspeed(s): 1950 to 2200[*]ESC: Kontronik HeliJive 120HV[*]Governor: Vbar/Helijive[*]BEC: None[*]RX Pack: TP 2S Lipo[*]Cyclic Servos: Outrage BL9180 HV[*]Tail Servo: Outrage BL9188 HV[*]Main Blades: Stock SAB's[*]Tail Blades: Stock SAB's[*]Lipos: 12s Flightpower [*]Anything else: nope

[teb1963]

Bump to the top, I think this has been lost in the shadows. After seeing all the posts I have upgraded myself from the Jive80+ to the Jive120+. Keep the setups coming. Teb

[gww528]

Flight Style: Sport / Smooth 3D / Big Sky
FBL System: Blue full size vbar 5.2
Motor: Scorpion 4035-500kv
Target Headspeed(s):1850/1900/1955
ESC/Governor: Caslte HV Ice2 120
BEC: -------
RX: Spectrum 7610
RX Pack: A123 2s1p
Cyclic Servos: JR DS8917 HV
Tail Servo: Bls 256 HV
Main Blades: Stock Sab
Tail Blades: KBDD/SAB
Lipos: 5000mah 12s

[geekindenial]

The list of batteries here are making me worried. I've bought a couple of pairs of Hyperion EX (45C) 4200mAh, not sure if it will hold up. If not I may have to lower head speed to crappy low levels to make it work. Sigh....

[Mystic3D]

Originally Posted by geekindenial

The list of batteries here are making me worried. I've bought a couple of pairs of Hyperion EX (45C) 4200mAh, not sure if it will hold up. If not I may have to lower head speed to crappy low levels to make it work. Sigh....

If you have a reasonable motor you should get 4 min. I am running 4400's not that much diff

[jamin_00]

I'm toying with the idea of now using a Pyro 700-52 as they are really a cracking motor. May do yet not sure but if I do I will sell off my Scorpion LE motor as it just been sat here doing nothing since I got it

[ghost400]

If I would already own a 4525, for sure I would give it a try first and see about it's results in real life.

IMO the Pyro should not be too bad, since it's pretty light weight and would save 125gr in comparison to the 4525.

But as already mentioned: I would give the 4525 a try if I already had one on my table.

[Scottyb410]

OK, time to weigh in:

• Flight Style: Sport - Smooth 3D - Big Sky - Speed
• FBL System: Skookum SK 720 with power buss
• Motor: Scorpion 4525 - 520LE
• Pinion: 23-24T
• Target Head-speed(s):1800-2000
• ESC: YGE Hv 160
• Governor: CC ICE2 or SK720 with YGE
• BEC: Gryphon Hyper BEC at 8v
• RX Pack: Voltz 1100 3s
• Cyclic Servos: Outrage BL 9180 HV
• Tail Servo: Outrage BL 9188 HV
• Main Blades: SAB Stock
• Tail Blades: SAB Stock
• Lipos: Voltz 65C 5100
• Anything else: Psychotherapy to recover from the money I have spent

[felborn]

Originally Posted by Scottyb410

[*]Anything else: Psychotherapy to recover from the money I have spent[/LIST]

I have not dared to summon it all up yet, where will this setup land you costwise?

[mykel]

Mine

• Flight Style: Sport - Big Sky - Speed
• FBL System: Skookum SK 720 with power bus
• Motor: Scorpion 4035-500
• Pinion: STD
• Target Head-speed(s):1800-2000
• ESC: CC ICE2 160HV
• Governor: CC ICE2 or SK 720
• BEC: Hercules Super Battery Eliminator
• RX Pack: TP 1900
• Cyclic Servos: JR8917 HV
• Tail Servo: MKS980 HV
• Main Blades: SAB Stock
• Tail Blades: SAB Stock
• Lipos: TP 65C 5000
• Anything else:

[jhunter]

With 4535le vbar helijive and Torq servos all the way around.

[gww528]

Originally Posted by mykel

Mine

• Flight Style: Sport - Big Sky - Speed
• FBL System: Skookum SK 720 with power bus
• Motor: Scorpion 4035-500
• Pinion: STD
• Target Head-speed(s):1800-2000
• ESC: CC ICE2 160HV
• Governor: CC ICE2 or SK 720
• BEC: Hercules Super Battery Eliminator
• RX Pack: TP 1900
• Cyclic Servos: JR8917 HV
• Tail Servo: MKS980 HV
• Main Blades: SAB Stock
• Tail Blades: SAB Stock
• Lipos: TP 65C 5000
• Anything else:

We have similar setups. I am going with CC ICE2 120HV. Why are you using the CC ICE2 160HV?

Thx

[Mystic3D]

Originally Posted by jhunter

With 4535le vbar helijive and Torq servos all the way around.

Decided on what gov? You know where I am going with this..


Sent from my iPhone using Tapatalk

[peter_larsen]

Here's mine

• Flight Style: Smooth 3D / Big Sky
• FBL System: Mikado, V-Bar, 5.2 Express (to start with)
• Motor: Scorpion, HK5020-450, 450kV
• Pinion: Dunno yet
• Target Headspeed(s): 1600, 1800, 2000
• ESC: Kontronik Jive 80+HV with heatsink
• Governor: Kontronik Jive
• BEC: Kontronik Jive
• RX Pack: None, will use the Jive BEC
• Cyclic Servos: Futaba BLS451
• Tail Servo: Futaba BLS251
• Main Blades: Stock SAB Goblin Green 700mm
• Tail Blades: Stock SAB Goblin Green
• Lipos: Turnigy and Turnigy NanoTech 2x6S 5000 45C
• Anything else: Maybe a buffer pack w/Jive

[jhunter]

That's the plan at least