Register Now

rdlohr · 03-14-2011, 09:05 PM

Where ever it takes to make it flat the whole way across. Is the head higher or the grips? Build the lower area up to match the others. It doesn't have to be exact. The Polycarbonate flexes a little.

Rick

arquitron · 03-14-2011, 09:13 PM

Quote:

Originally Posted by rdlohr

Where ever it takes to make it flat the whole way across. Is the head higher or the grips? Build the lower area up to match the others. It doesn't have to be exact. The Polycarbonate flexes a little.

Rick

I would say the head is higher by approx. +- 2 mm

rdlohr · 03-14-2011, 09:28 PM

OK, so you would put washers between the grips and the tool. The washers I send are about 1.1mm thick so that should get you pretty close. You can use cardboard or paper as well.
Rick

scientist · 03-15-2011, 08:26 PM

Quote:

Originally Posted by rdlohr

Does the Rave 450 have a flat head and grips? If it does, my Universal 250-450 Zero Pitch Tool should work. If it is not flat, I don't have a Rave 450 specific tool, sorry.

Rick

Hi rick heres the Rave 450 head, don't know if your universal pitch tool well work on this.

Let me know soon. thanks

rdlohr · 03-15-2011, 08:32 PM

Sorry. It won't work with that head.
Rick

hoot · 03-15-2011, 08:32 PM

I think you are out of luck with the overslung flybar but what does the flybarless head look like?

scientist · 03-19-2011, 08:09 AM

@Rick,

You have plan to make one for Rave 450?let me know soon.

@hoot

Here's a FBL Rave 450

rdlohr · 03-19-2011, 10:09 AM

Now for that head, my Universal 250-450 Zero Pitch tool should work. The blade grips are flat and it looks like there is clearance. You may need to use a few washers to get everything close to level, but the Polycarbonate flexes a little so it should still work fine.

Rick

scientist · 03-19-2011, 10:41 AM

Hi Rick, For the FBL your universal tool well work, how about the Flybared ones? You have plan to make one? it seems Rave 450 user's grows up.

rdlohr · 03-19-2011, 11:05 AM

Quote:

Originally Posted by scientist

Hi Rick, For the FBL your universal tool well work, how about the Flybared ones? You have plan to make one? it seems Rave 450 user's grows up.

Sorry, I have no plans at this time. I don't have a Rave head to design with and it really doesn't look like a good candidate for a similar design due to Rave design placing the flybar above the blades. If I do I will let you know though. Thanks for the interest!

Rick

Luvmyhelis · 04-13-2011, 02:19 PM

Awesome tool! When my Trex 700e fbl shows up I am certainly going to order one. Great vid once again.. Hey, any news on the mikado setup in the vid?
Randy

Finless · 04-13-2011, 06:18 PM

I am not building a Mikado in the near future so not sure what setup vid your looking for? I know Rick is building a Mikado heli so maybe he is going to do one?

Bob

Luvmyhelis · 04-13-2011, 11:47 PM

I just saw the mikado vbar in the vid and wondered. Not the heli. Sorry Bob. I have one hung on my new 700e coming in the mail. There is a whole dedicated section on HF on it of coarse but would love to see your approach as your vids tend to take very confusing issues and bring common sense simplicity into the equation.
Randy

Zaaaguy72 · 04-19-2011, 11:34 AM

I bought ones for both my logo 500 and 600, they work good. I had to file out he slits on the Logo 500 sized though because they were too narrow, but other than that, they work good.

rdlohr · 04-19-2011, 05:01 PM

Quote:

Originally Posted by Zaaaguy72

I bought ones for both my logo 500 and 600, they work good. I had to file out he slits on the Logo 500 sized though because they were too narrow, but other than that, they work good.

That doesn't sound right. Maybe you ended up with a Logo 400 version by accident. PM me your shipping name and address and I'll send you the Logo 500 version.

Rick

Zaaaguy72 · 04-19-2011, 07:11 PM

I really appreciate that Rick, shows really good product support. Thanks.

Chris

rdlohr · 07-20-2011, 10:30 PM

My pleasure
Rick

pkm_heliman · 10-31-2012, 09:52 PM

Rick...
I know this isn't the 130x forum, but I was wondering if you have one of these cool tools for the Blade 130x?

cpmboy · 11-14-2012, 06:46 AM

do you (rick) one for the mini?

rdlohr · 11-14-2012, 05:31 PM

Quote:

Originally Posted by pkm_heliman

Rick...
I know this isn't the 130x forum, but I was wondering if you have one of these cool tools for the Blade 130x?

Quote:

Originally Posted by cpmboy

do you (rick) one for the mini?

No, sorry. My universal tool works down to about 250 size.

The 130x would need a specially made tool by the looks of that built in head button. I think I will make one for that soon.

Not sure which "mini" you mean cpmboy.

Rick

03-14-2011, 09:05 PM	#21 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	Where ever it takes to make it flat the whole way across. Is the head higher or the grips? Build the lower area up to match the others. It doesn't have to be exact. The Polycarbonate flexes a little. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

03-14-2011, 09:28 PM	#23 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	OK, so you would put washers between the grips and the tool. The washers I send are about 1.1mm thick so that should get you pretty close. You can use cardboard or paper as well. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

03-15-2011, 08:32 PM	#25 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	Sorry. It won't work with that head. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

03-15-2011, 08:32 PM	#26 (permalink)
hoot Registered Users My HF Map location Join Date: Sep 2005	I think you are out of luck with the overslung flybar but what does the flybarless head look like? __________________ Rotormast V-22 Osprey, 2 450 Clones, BL P-51, Micro P51, Stryker, 2 Vapors,

03-19-2011, 08:09 AM	#27 (permalink)
scientist Registered Users Join Date: Jan 2011	@Rick, You have plan to make one for Rave 450?let me know soon. @hoot Here's a FBL Rave 450 __________________ Rave450 x Velocity50 x Logo600SE x ArducopterMulti.x Gaui 330X x Mikrokopter Hexa x MultiWii x XAirCraft X650V8

03-19-2011, 10:09 AM	#28 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	Now for that head, my Universal 250-450 Zero Pitch tool should work. The blade grips are flat and it looks like there is clearance. You may need to use a few washers to get everything close to level, but the Polycarbonate flexes a little so it should still work fine. Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

03-19-2011, 10:41 AM	#29 (permalink)
scientist Registered Users Join Date: Jan 2011	Hi Rick, For the FBL your universal tool well work, how about the Flybared ones? You have plan to make one? it seems Rave 450 user's grows up. __________________ Rave450 x Velocity50 x Logo600SE x ArducopterMulti.x Gaui 330X x Mikrokopter Hexa x MultiWii x XAirCraft X650V8

04-13-2011, 02:19 PM	#31 (permalink)
Luvmyhelis Registered Users Join Date: Jul 2010	Awesome tool! When my Trex 700e fbl shows up I am certainly going to order one. Great vid once again.. Hey, any news on the mikado setup in the vid? Randy __________________ If it can be done wrong, I will find a way to excel at it.

04-13-2011, 06:18 PM	#32 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	I am not building a Mikado in the near future so not sure what setup vid your looking for? I know Rick is building a Mikado heli so maybe he is going to do one? Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

04-13-2011, 11:47 PM	#33 (permalink)
Luvmyhelis Registered Users Join Date: Jul 2010	I just saw the mikado vbar in the vid and wondered. Not the heli. Sorry Bob. I have one hung on my new 700e coming in the mail. There is a whole dedicated section on HF on it of coarse but would love to see your approach as your vids tend to take very confusing issues and bring common sense simplicity into the equation. Randy __________________ If it can be done wrong, I will find a way to excel at it.

04-19-2011, 11:34 AM	#34 (permalink)
Zaaaguy72 Registered Users Join Date: Nov 2007	I bought ones for both my logo 500 and 600, they work good. I had to file out he slits on the Logo 500 sized though because they were too narrow, but other than that, they work good. __________________ Team HeliProz

04-19-2011, 07:11 PM	#36 (permalink)
Zaaaguy72 Registered Users Join Date: Nov 2007	I really appreciate that Rick, shows really good product support. Thanks. Chris __________________ Team HeliProz

07-20-2011, 10:30 PM	#37 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	My pleasure Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

10-31-2012, 09:52 PM	#38 (permalink)
pkm_heliman Registered Users Join Date: Nov 2009	Rick... I know this isn't the 130x forum, but I was wondering if you have one of these cool tools for the Blade 130x?

11-14-2012, 06:46 AM	#39 (permalink)
cpmboy Registered Users Join Date: Aug 2011	FBL o pitch tool for mini protos FBL... do you (rick) one for the mini? __________________ All begins (Jun 2011)....... Next project: MSH Mini Protos, 450 Scale Airwolf, BAH Mini Quad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in