Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Airplanes Info and Support > Airplane Related


Airplane Related R/C Airplanes Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 09-26-2006, 07:55 PM   #1 (permalink)
 

Join Date: Sep 2006
Default Unwanted Mixing

I flew my Tribute today, after hovering several flight and flying, on my last flight I noticed when advancing throttle my ailerons-elevator moves when advancing throttle. Just thinking what to check first. :?
Crystal issue
Radio-JR 6102
ESC-CC 25
Rx
Icenum is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 09-26-2006, 08:03 PM   #2 (permalink)
Registered Users
 
Posts: 3,072
 
My HF Map location
Join Date: Apr 2005
Default

Check the servo monitor first to see if the interaction is coming from the TX or RX.
Most likely it is from the TX, you need to go thru all of the P-Mix's to find the culprit.
It could be a built in mix that is active but should not be.

Make sure it is not some mechanical interference in the airframe or a loose servo tray or something along that lines.

There is no easy way to find these things.
__________________
Jeff Borowski
flyinfool is offline        Reply With Quote Quick reply to this message
Old 09-30-2006, 08:39 PM   #3 (permalink)
Thread Starter Thread Starter
 

Join Date: Sep 2006
Default

Turned out to be Rx going bad, only acted up when temp. dropped. Tried another Rx problems solved.
Icenum is offline        Reply With Quote Quick reply to this message
Old 10-01-2006, 04:28 PM   #4 (permalink)
Registered Users
 
Posts: 3,072
 
My HF Map location
Join Date: Apr 2005
Default

That's a new one.
I learn somthing new every day.
Glad you found it.
__________________
Jeff Borowski
flyinfool is offline        Reply With Quote Quick reply to this message
Old 10-03-2006, 07:01 PM   #5 (permalink)
Thread Starter Thread Starter
 

Join Date: Sep 2006
Default

Me too, once I had one year back, hard rudder deflection with throttle. I replaced ESC, but it turned out to be a defective servo pot. Servo worked normally mechanical wise.
Icenum is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1