START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Century Century Helicopters Support |
|
LinkBack | Thread Tools | Display Modes |
04-25-2014, 08:04 PM | #1 (permalink) |
Registered Users
Join Date: Jul 2012
|
Radikal G20 Mast Stopper M2.5x8 Cap Screw & Mystery Parts
Hi,
The M2.5x8 cap screw is not long enough to catch the threads on the other side, so I replaced it with a M2.5x10. Is this a typical problem with this kit? In the hardware bags, I found 2 Aluminum Posts (HI6031S) with screws that I don't know what for? The kit has 4 Frame Support Bars that kinda look like the aluminum post, but flat on one side and they are already installed. Where do those 2 aluminum posts go; a picture would be very helpful. Thanks in advance.
__________________
Born to crash, live to fly |
Sponsored Links | |||
Advertisement |
|
04-25-2014, 08:44 PM | #2 (permalink) |
Registered Users
Join Date: Oct 2007
|
The third picture is what your canopy mounts screw into (behind the head).
The second picture is what your bell cranks screw into (in front of the head) The first picture is the rear electronics tray,
__________________
Ted Schubert I always have fun. Some times are more fun than others. I can't remember half the crap I forgot. |
04-25-2014, 08:47 PM | #3 (permalink) |
Registered Users
Join Date: Oct 2007
|
Honestly I just put the one between the canopy mounts, but I don't see it in the manual.
Ted
__________________
Ted Schubert I always have fun. Some times are more fun than others. I can't remember half the crap I forgot. |
04-26-2014, 07:23 PM | #4 (permalink) |
Registered Users
Join Date: Nov 2004
|
What version of the G20? In any event, the proper length for the mast stopper is 10mm. There were some early versions that had these M2.5 x 10 screws in a small plastic back stapled to one of the pages of the manual. If yours did not come with them, contact the store you purchased the kit from and they can get them for you and Century will replace them.
__________________
Phil |
Thread Tools | |
Display Modes | |
|
|