 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| Flybarless Helicopter Systems CSM Cyclock, Helitronix Multi-mixer, Spartan AP2000i, Firmtronix Digimix-3, Gyrobot, SK360and AC3X |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
03-24-2014, 04:19 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Jul 2010
|
HITec 65 with FBL?
Ok so my neighbors son gave me an older HK450 pro and some misc electronics including a V1 ZYX FBL unit. I have ZERO experience with FBL and was curious if my spare HiTec 65's would work or if I'm going to need to purchase some cheap digitals.
This is just a spare heli for goofing off and circuit flying. All the mechanics are in order (new shielded bearings, Align shafts, RJX FBL head, etc) but I dont have any digital servos available at the moment. Should I use what I have on hand or wait until I can find a deal on some digitals? I'm really trying not to spend anything on it unless it's absolutely necessary.What do you guys think? |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
03-24-2014, 04:44 PM
|
#2 (permalink) |
|
Registered Users
Join Date: Nov 2009
Location: Western NC
|
I use them with my 450 Sport FBL with a BeastX, and they are great.
G.
__________________
T-450 Sport FBL, T-550 V1 FBL, Red Goblin 700. Goblin 500. 350 QX. Bunch of little Blades, and Planks. DX8 G-2, Retired Full scale Jet Plank Driver, U.S. Navy Ret. |
|
|
|
|
03-24-2014, 04:55 PM
|
#3 (permalink) |
|
Registered Users
Join Date: May 2010
|
+1 they work with my beasts as well!
|
|
|
|
|
03-24-2014, 05:31 PM
|
#4 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jul 2010
|
Perfect. A brand new FBL 450 for FREE!
 Now, if anyone has a 550+ they're giving up on...  |
|
|
|
|
03-24-2014, 05:34 PM
|
#5 (permalink) |
|
Join Date: Jun 2008
|
And for setup of the ZYX, there is a Sticky which may be helpful and in the Flybarless Helicopter Systems sub-forum, many other posts on the ZYX.
https://www.helifreak.com/showthread.php?t=485789 Sounds like you won the lottery  Mike |
|
|
|
|
03-24-2014, 05:43 PM
|
#6 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jul 2010
|
Hit the Lotto....
Tow, I lucked up...right place, right time. I'll check out the sticky tonight when I get ready to set it all up. Thanks for the heads up,
|
|
|
|
|
03-24-2014, 10:39 PM
|
#7 (permalink) |
|
Registered Users
|
Yep, ZYX and 65hb's on a 450 pro, works well for me.
__________________
Sigma, MCX, MSR, BOL, B400 BSR, EXI 450 Pro FBL, mCPX Align 500ESP FBL AXN FPV |
|
|
|
|
03-25-2014, 01:24 AM
|
#8 (permalink) |
|
Registered Users
Join Date: May 2013
|
using the 65hb on on my pro dfc... with Robird...
Am still on carnobite gears... love them, they remain tight and slop free even after hundreds of flight... and they're very cheap to replace if you strip the gears!
__________________
X7F#1-Xnova 4530-525, HW 160HV V4, MKS X8 Servos, Mini Vbar X7F#2-HK4525-520 LE, HW 160HV V4, MKS X8 Servos, Mini Vbar |
|
|
|
|
03-27-2014, 01:33 AM
|
#9 (permalink) |
|
Registered Users
Join Date: Jan 2014
|
Re: HITec 65 with FBL?
Unlike my Align ds410 metal gears wich cost almost the same as the entire new servo. I guess I'm gonna buy some Hitecs too.
__________________
Cheap nitro engine to gasser conversion thread (OS,TT Redline, ASP)
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
