Register Now

Slyster · 08-20-2014, 07:18 PM

Anyone else have this issue? No matter what I cannot see the "send to gyro" button... I see enough of it to click it though. I've tried everything including changing my screen resolutions etc. Is this a Win 8.1 thing?

desertstalker · 08-20-2014, 07:54 PM

Check the system DPI setting, AFAIK if it is more than 100% you will not be able to see the buttons.

Jeti software has the same issue, they did not design it to re-size window properly.

Xrayted · 08-20-2014, 07:55 PM

Not just Windows 8. I reported the same issue and posted up images right when the update came out and I'm running windows 7 home premium.

Mine will always open tiny despite the setting to maximum, and requires me to manually drag the box open. I can do alittle better than you and see the top edge border of the button only. Previous version were fine.

nickyd · 08-20-2014, 08:42 PM

I use F1 to Send to then. F4. to disconnect.

Slyster · 08-20-2014, 08:53 PM

yeah my MS Surface keyboard doesn't have F1 keys.....

georgi UK · 08-20-2014, 08:59 PM

=] auto send working for you?

Slyster · 08-20-2014, 09:39 PM

It doesn't seem to be instant... like every time I move the sliders etc... was always unsure if it send or not so I clicked it after every change. I can see enough of it to click, but people new to Skookum won't see it.

lcc014 · 08-21-2014, 12:04 PM

Quote:

Originally Posted by Slyster

Anyone else have this issue? No matter what I cannot see the "send to gyro" button... I see enough of it to click it though. I've tried everything including changing my screen resolutions etc. Is this a Win 8.1 thing?

I just found out something last night regarding to the Send button in v4.02.

Go to Preferences --> Send Setup by --> Send Button.

Give it a try; Send Setup (F1) button should appear in the lower left hand corner.

Ching-Ho Cheng

Xrayted · 08-21-2014, 06:45 PM

Quote:

Originally Posted by lcc014

I just found out something last night regarding to the Send button in v4.02.

Go to Preferences --> Send Setup by --> Send Button.

Give it a try; Send Setup (F1) button should appear in the lower left hand corner.

Ching-Ho Cheng

We know that, and that isn't the problem being discussed here. The issue is that for some of us, the software doesn't open up wide enough to see all or any of the button once activated. See the image and comments in post # 3

lcc014 · 08-21-2014, 06:59 PM

Quote:

Originally Posted by Xrayted

We know that, and that isn't the problem being discussed here. The issue is that for some of us, the software doesn't open up wide enough to see all or any of the button once activated. See the image and comments in post # 3

Got it. Have you tried this:

Control Panel --> All control Panel Items --> Display. Then "Change the size of all items" ? I am using Smaller - 100% (default).

Xrayted · 08-21-2014, 07:09 PM

Quote:

Originally Posted by lcc014

Got it. Have you tried this:

Control Panel --> All control Panel Items --> Display. Then "Change the size of all items" ? I am using Smaller - 100% (default).

I've never changed any of my display settings, but I'll take another look just in case. The prior versions of software were fine, but maybe this one needs something different. My display is the normal 100% settings, but I'll play around in the control panel and see if anything changes.

lcc014 · 08-21-2014, 07:27 PM

Quote:

Originally Posted by Xrayted

I've never changed any of my display settings, but I'll take another look just in case. The prior versions of software were fine, but maybe this one needs something different. My display is the normal 100% settings, but I'll play around in the control panel and see if anything changes.

I do not have to change the display in my Win 8 and Win 7. Both works fine, maybe just my luck.

Slyster · 08-21-2014, 07:36 PM

Its a bug. No one should have to change anything in their PC settings to get the button to show. I'll email Art.

Slyster · 10-07-2014, 05:04 PM

why hasn't this been fixed yet? Local friend having issues too until he 'discovered' the button is mostly hidden.

SpeedTape · 10-07-2014, 06:52 PM

Quote:

Originally Posted by Slyster

why hasn't this been fixed yet? Local friend having issues too until he 'discovered' the button is mostly hidden.

It has been fixed in version 4.05 of the GUI/Firmware/etc that is currently in beta testing. The last niggling little bugs that beta testers are finding are being worked out as of this writing. The new version should be released... mañana.

Slyster · 10-07-2014, 07:18 PM

Excellent! Thanks SpeedTape

lcc014 · 10-07-2014, 07:49 PM

Have not seen the latest version of software, it is still at 4.02 ?

SpeedTape · 10-07-2014, 07:57 PM

Quote:

Originally Posted by lcc014

Have not seen the latest version of software, it is still at 4.02 ?

V4.02 is the latest version of the UI. The latest gyro and LCD firmware version is v4.00.

Version v4.05 of everything is currently in beta testing and hasn't been released yet.

lcc014 · 10-08-2014, 07:15 AM

Got it. Any estimate of the release date ?

van-man-123 · 10-09-2014, 12:58 PM

If you cant see the send button use F1 and it will update your settings to. The gyro

08-20-2014, 07:18 PM	#1 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	"Send to" issue... Win 8.1. CAN'T SEE BUTTON! Anyone else have this issue? No matter what I cannot see the "send to gyro" button... I see enough of it to click it though. I've tried everything including changing my screen resolutions etc. Is this a Win 8.1 thing? Attached Thumbnails __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles Last edited by Slyster; 08-20-2014 at 11:54 PM..

08-20-2014, 07:54 PM	#2 (permalink)
desertstalker Registered Users Join Date: Apr 2011	Check the system DPI setting, AFAIK if it is more than 100% you will not be able to see the buttons. Jeti software has the same issue, they did not design it to re-size window properly. __________________ -DX8 -MSH MiniProtos Stretched, SK720, DS95/DS95i, Hyp 4S 25C 2500mAh -MSH Protos Stretched, Brain, Hyp DS16/BLS251, 6S 3000mAh -Goblin 500, HC3SX, Hyp DH16/MKS980BL, Scorp 4015-1100

08-20-2014, 07:55 PM	#3 (permalink)
Xrayted Registered Users Join Date: Sep 2008 Location: Smyrna, GA	Not just Windows 8. I reported the same issue and posted up images right when the update came out and I'm running windows 7 home premium. Mine will always open tiny despite the setting to maximum, and requires me to manually drag the box open. I can do alittle better than you and see the top edge border of the button only. Previous version were fine. __________________ Tony Synergy 516, Gaui R-5 Speed (RIP), Cypher Vtol Jet (RIP), Spirit FBL, Hobbywing and Scorpion Tribunus ESC, Xnova motors. The girl in my DX9 tells them all what to do

08-20-2014, 08:42 PM	#4 (permalink)
nickyd Registered Users Join Date: Feb 2010	I use F1 to Send to then. F4. to disconnect. __________________ Nick Flying your heli the world is still out there, but at least for the time it hasn't got you by the throat. Mini Titan E325 FBL, Blade Nano Cpx

08-20-2014, 08:53 PM	#5 (permalink)
Slyster Registered Users Thread Starter My HF Map location Join Date: May 2008	yeah my MS Surface keyboard doesn't have F1 keys..... __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

08-20-2014, 08:59 PM	#6 (permalink)
georgi UK Join Date: Mar 2007	=] auto send working for you? __________________

08-20-2014, 09:39 PM	#7 (permalink)
Slyster Registered Users Thread Starter My HF Map location Join Date: May 2008	It doesn't seem to be instant... like every time I move the sliders etc... was always unsure if it send or not so I clicked it after every change. I can see enough of it to click, but people new to Skookum won't see it. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

08-21-2014, 07:36 PM	#13 (permalink)
Slyster Registered Users Thread Starter My HF Map location Join Date: May 2008	Its a bug. No one should have to change anything in their PC settings to get the button to show. I'll email Art. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

10-07-2014, 05:04 PM	#14 (permalink)
Slyster Registered Users Thread Starter My HF Map location Join Date: May 2008	why hasn't this been fixed yet? Local friend having issues too until he 'discovered' the button is mostly hidden. __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

10-07-2014, 07:18 PM	#16 (permalink)
Slyster Registered Users Thread Starter My HF Map location Join Date: May 2008	Excellent! Thanks SpeedTape __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

10-07-2014, 07:49 PM	#17 (permalink)
lcc014 Registered Users Join Date: May 2011	Have not seen the latest version of software, it is still at 4.02 ? __________________ Nano CPx, Hirobo Quark 250 SE, Pro Upper Frame, Talon25, KDE, KST215, DS95i, Mini Vbar 450 Pro (6s), KDE, Lynx, Tarot, RJX, YEP40, KST215 & 515, SK540 465 (6s), Align DFC, HW50AV3, KST315 & 8910A+, SK720BE

10-08-2014, 07:15 AM	#19 (permalink)
lcc014 Registered Users Join Date: May 2011	Got it. Any estimate of the release date ? __________________ Nano CPx, Hirobo Quark 250 SE, Pro Upper Frame, Talon25, KDE, KST215, DS95i, Mini Vbar 450 Pro (6s), KDE, Lynx, Tarot, RJX, YEP40, KST215 & 515, SK540 465 (6s), Align DFC, HW50AV3, KST315 & 8910A+, SK720BE

10-09-2014, 12:58 PM	#20 (permalink)
van-man-123 Registered Users Join Date: Mar 2010	If you cant see the send button use F1 and it will update your settings to. The gyro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in