How do i bind normal rx?

[mrultralite]

trying to bind an aR 6100e , but the RX to GT5 connections seem to preclude the use of the bind plug i. I've tried a number of combos , each time the AR6100 light goes steady like its binded but then when i turn it back on it isn't

Tried binding the RX separately and through the GT5
Closest i've got is w/ the esc plugged into the GT5 [freeing up the Batt. post on the ar6100 for the bind plug] , then binding through the GT5 , when done the RX light is steady but its still not bound.

Still not sure of right proceedure even.
still binds to a sat.

not sure if i should still be binding in Spektrum mode w/ normal Rx?

[mrultralite]

FRom TT , thanks guys;

Please bind your transmitter and receiver first. Then connect 3 wires from the receiver to the GT5 per the manual and set up the "receiver" to be 5ch on the GT5.

[mrultralite]

Got it going, had to experiment all morning to get the RX - GT5 plugs in right spots.

everything seems to be working on test stand [ i had to rest everything], but those lights in the 'gain ' column blink alot and total gain seems to be zero now or nor registering, plus the RC indicator is now an ''!''.

I now have 'failsafe'!

[mrultralite]

Flew it and the I d-stick was now way off [low] nearly uncontrollable