Register Now

HeliHoverAP · 09-04-2012, 11:24 AM

All right guys, let's see some pics.

mcfast · 09-04-2012, 09:45 PM

Here you go 800 class heli

col · 09-04-2012, 11:13 PM

Thats beutifull

nightflyr · 09-05-2012, 04:27 PM

Only 800's I have left....

The rest are grown up

Sneaglebob · 09-06-2012, 01:10 AM

Quote:

Originally Posted by mcfast

Here you go 800 class heli

How much did that cost? How big is it? Whats it called?

dodgeboy · 09-06-2012, 05:35 PM

i know the jet engine is probably around 3-5000 bucks

61Espo · 09-06-2012, 06:51 PM

Nice Fleet Nightflyr....

kavic5150 · 09-12-2012, 02:51 AM

Its official, all my helis are toys.

mcfast · 09-17-2012, 05:48 PM

"How much did that cost? How big is it? Whats it called?"

They cost about $8000, depends on the options you get.

I had 830mm blades on it and about 25lbs with fuel, 2L good for 15 mins at most.

It is a JetCopter SX

http://www.airstarintl.com/index.php...tcopter-1.html

breedatrad · 09-25-2012, 04:16 PM

Here's a JR VIBE 3D that I converted to an 800.

I used a CF tail boom from the GSR260Z and then lengthened the TR Tube Drive and Pushrod by 97mm ea.

It flies great and autos like crazy. It'll hang forever in a breeze. By the time it does finally set down, you'd swear the blades were nearly stopped. The heavy (280g.) EDGE blades are a bit much for a .91 engine but at +/- 9 Deg. of pitch, it doesn't load too bad. (Good for practicing collective management.)

The conversion only took about an hr.

Brian

trippergreenfeet · 10-01-2012, 02:38 AM

Here's one of my two Volt 8's, the other one runs different electroncis, head and blades.

Timtreo · 10-01-2012, 09:26 PM

I have to get out of this section before the wheels start turning in my head

. Very nice helis guys!

mattox · 10-01-2012, 11:32 PM

Quote:

Originally Posted by trippergreenfeet

Here's one of my two Volt 8's, the other one runs different electroncis, head and blades.

Do you have a link to the website where those frames are sold?

Mattox

trippergreenfeet · 10-02-2012, 01:46 AM

Quote:

Originally Posted by mattox

Do you have a link to the website where those frames are sold?

Mattox

http://www.fullpitch.co.uk/#/shop/4562359508

The Volt 700E set is used for the 800

Also sent you a PM.

col · 10-02-2012, 01:48 AM

Thats a VOLT design:
https://www.helifreak.com/showthread...ighlight=haydn

https://www.helifreak.com/showthread...ighlight=haydn

VOLT · 10-02-2012, 05:39 AM

AAAAAAANNND back on topic
Here ya go some of my 800 stuff....

nice thread keep it up folks !!!!

trippergreenfeet · 10-02-2012, 06:34 AM

This Volt 800 used to belong to Taipan, he managed to ring a fairly decent speed out of it.

col · 10-02-2012, 07:06 AM

Dam that's fast! Banshee killer, good work guys

Jag · 10-09-2012, 07:46 AM

Here's my Wolf 800 setup-

This one is set up for 14s and 2000rpms
Using the new Full metal jacket main gear (118T w 11t pinion)
New YGE 160 HV dialed up for 16s (I will set this one for 16s very soon)
BLS 451's on 8 volts
Torq 9188 Tail servos on 8 volts
Vbar with 5.3 pro (using vbar gov)
Matt Black 800's
Rail 116's on tail
KDE head block
Lynx Thrusted bearing blocks
Goblin Canopy

09-04-2012, 11:24 AM	#1 (permalink)
HeliHoverAP Registered Users Join Date: Oct 2009	Post your 800 Pics Here! All right guys, let's see some pics.

09-04-2012, 09:45 PM	#2 (permalink)
mcfast Registered Users Join Date: Jun 2012	Here you go 800 class heli Attached Thumbnails

09-05-2012, 04:27 PM	#4 (permalink)
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Only 800's I have left.... The rest are grown up __________________ MSR x1 / mCPX x2 / 450 x4 / Chaos600 test bed / Chaos600 Air-Wolf / American WereWolf 800 / KFrame800/900/1000 / Assorted Fixed Wing JR9303 / JR9503 / Futaba10CHP

09-06-2012, 05:35 PM	#6 (permalink)
dodgeboy Registered Users Join Date: Nov 2011	i know the jet engine is probably around 3-5000 bucks __________________ Empire Hobby/ Team Gaui USA -- Rcbearings.com -- Cyclone Blades -- Team KDE -- A-Main Hobbies -- OMG servos

09-06-2012, 06:51 PM	#7 (permalink)
61Espo Registered Users Join Date: Nov 2011	Nice Fleet Nightflyr.... __________________ Steve (ESPO) I Refuse to Give Up! HIROBO SST EAGLE 3 WC / EVO 50 / FREYA 90 / FUTABA 14SGH RIP Roman Pirozek Jr. *Seaview Rotary Wings, Brooklyn New York*

09-04-2012, 11:13 PM	#3 (permalink)
col Registered Users Join Date: Feb 2008	Thats beutifull

09-12-2012, 02:51 AM	#8 (permalink)
kavic5150 Banned User Join Date: Jan 2010	Its official, all my helis are toys.

09-17-2012, 05:48 PM	#9 (permalink)
mcfast Registered Users Join Date: Jun 2012	"How much did that cost? How big is it? Whats it called?" They cost about $8000, depends on the options you get. I had 830mm blades on it and about 25lbs with fuel, 2L good for 15 mins at most. It is a JetCopter SX http://www.airstarintl.com/index.php...tcopter-1.html

09-25-2012, 04:16 PM	#10 (permalink)
breedatrad Registered Users Join Date: Jun 2004	VIBE 3D 800 Here's a JR VIBE 3D that I converted to an 800. I used a CF tail boom from the GSR260Z and then lengthened the TR Tube Drive and Pushrod by 97mm ea. It flies great and autos like crazy. It'll hang forever in a breeze. By the time it does finally set down, you'd swear the blades were nearly stopped. The heavy (280g.) EDGE blades are a bit much for a .91 engine but at +/- 9 Deg. of pitch, it doesn't load too bad. (Good for practicing collective management.) The conversion only took about an hr. Brian Attached Thumbnails

10-01-2012, 02:38 AM	#11 (permalink)
trippergreenfeet Registered Users My HF Map location Join Date: Feb 2008	Here's one of my two Volt 8's, the other one runs different electroncis, head and blades. Attached Thumbnails __________________

10-01-2012, 09:26 PM	#12 (permalink)
Timtreo Registered Users Join Date: Dec 2011	I have to get out of this section before the wheels start turning in my head . Very nice helis guys! __________________ Check out my Night Blades Blog here on HF

10-02-2012, 01:48 AM	#15 (permalink)
col Registered Users Join Date: Feb 2008	Thats a VOLT design: https://www.helifreak.com/showthread...ighlight=haydn https://www.helifreak.com/showthread...ighlight=haydn

10-02-2012, 05:39 AM	#16 (permalink)
VOLT Registered Users Join Date: Apr 2010	Back On topic AAAAAAANNND back on topic Here ya go some of my 800 stuff.... nice thread keep it up folks !!!! __________________ MiniVolt 500,Volt 600/700/800/1000 WereWolf 800 www.fullpitch.co.uk

10-02-2012, 06:34 AM	#17 (permalink)
trippergreenfeet Registered Users My HF Map location Join Date: Feb 2008	This Volt 800 used to belong to Taipan, he managed to ring a fairly decent speed out of it. __________________

10-02-2012, 07:06 AM	#18 (permalink)
col Registered Users Join Date: Feb 2008	Dam that's fast! Banshee killer, good work guys Last edited by col; 10-02-2012 at 04:13 PM..

10-09-2012, 07:46 AM	#19 (permalink)
Jag Registered Users Join Date: Jun 2006	My Wolf 800 Here's my Wolf 800 setup- This one is set up for 14s and 2000rpms Using the new Full metal jacket main gear (118T w 11t pinion) New YGE 160 HV dialed up for 16s (I will set this one for 16s very soon) BLS 451's on 8 volts Torq 9188 Tail servos on 8 volts Vbar with 5.3 pro (using vbar gov) Matt Black 800's Rail 116's on tail KDE head block Lynx Thrusted bearing blocks Goblin Canopy Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in