Ds620's for cyclic?

[xfactor6]

Can i put them on the 90 for cyclics. Would they be good just for sport flying?

[statton1]

im using 610's on mine.and ill b doing the flying u mentioned and may be some
precision flight

[Foxden]

keep an eye on the 620's @6v they only have 138oz of torque, the 610's have 166oz

has anyone run the 610's on 7.4 volts?

[Tradhunt]

I've ran the Align 610's through a AR7100R for quite a while. I've ran them on several different 50's and 90's without any issues.

I've ran the 620's on a few 50's as well. I prefer the 610's for the torque since the speed difference is not much between the 610's and 620's.

[discoferret]

Originally Posted by Tradhunt

I've ran the Align 610's through a AR7100R for quite a while. I've ran them on several different 50's and 90's without any issues.

I've ran the 620's on a few 50's as well. I prefer the 610's for the torque since the speed difference is not much between the 610's and 620's.

I think I'm going to get some 610's for the 90. I've only just started to do mild 3d, so these should be ok for my skills for a while.