Register Now

joecass2 · 09-23-2014, 10:30 PM

also have all the parts to make this back into a trex 550 with 600 boom. the nice thing about this conversion is the gear ratio for the OS engine 6.22. I also have a trex 700 metal fan that was 50.00 bucks from Germany. that keeps this engine nice and cool. I also like this kit because it is light 8.5 lbs at this weight the disk loading is really good.
helibug 550 kit

http://www.helibug.com/HB5-GT.htm

I have about 2 gallons of fuel though it and it really runs nice.

the servos and Vbar IS NOT INCLUDED with this heli

but here is wat is.
trex 550 air frame with motor and castle talon 90 ESC
trex 600 and 550 canopy
align 3G 550 main blades
KBDD 550 main blades wide core
It has the DFC head and will come also with the pro head you will needed to swich the grips over though
brand new carb. for the OS GT15HZ

I have about $1300.00 into it asking $650.00

clkandcjk · 09-24-2014, 01:04 PM

What kind of flight times did you get with this?

joecass2 · 09-24-2014, 06:31 PM

I only have a 4OZ tank and get a little over 5 minutes. But you can add what ever size tank you like and get as much time as you would like. I run a little tank to keep it as light as possible.

joecass2 · 09-27-2014, 06:31 AM

09-23-2014, 10:30 PM	#1 (permalink)
joecass2 Registered Users Join Date: May 2006	helibug trex 550 with OS GT15HZ SOLD also have all the parts to make this back into a trex 550 with 600 boom. the nice thing about this conversion is the gear ratio for the OS engine 6.22. I also have a trex 700 metal fan that was 50.00 bucks from Germany. that keeps this engine nice and cool. I also like this kit because it is light 8.5 lbs at this weight the disk loading is really good. helibug 550 kit http://www.helibug.com/HB5-GT.htm I have about 2 gallons of fuel though it and it really runs nice. the servos and Vbar IS NOT INCLUDED with this heli but here is wat is. trex 550 air frame with motor and castle talon 90 ESC trex 600 and 550 canopy align 3G 550 main blades KBDD 550 main blades wide core It has the DFC head and will come also with the pro head you will needed to swich the grips over though brand new carb. for the OS GT15HZ I have about $1300.00 into it asking $650.00 Attached Thumbnails Last edited by joecass2; 09-27-2014 at 08:55 PM..

09-24-2014, 01:04 PM	#2 (permalink)
clkandcjk Registered Users Join Date: Apr 2009	What kind of flight times did you get with this? __________________ T-Rex 500 ESP GY401/9254, DS510 x 3, Align 425D,Turnigy 6s 2650-3000, Align 500L T-Rex 450 GY401/9650, HS65MGs x 3, HC CF blades Blade 400 GY401/9650, HS65MGs x 3, HC CF blades, Zippy 2200 20c x7(shared), Turnigy 2836-3700 Motor, CC35 in Fixed End Point mode, Turnigy 3A UBEC E-Flite Blade mSR (stock) -- E-Flite Blade mCX (stock)

09-27-2014, 06:31 AM	#4 (permalink)
joecass2 Registered Users Thread Starter Join Date: May 2006	Bump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-24-2014, 06:31 PM	#3 (permalink)
joecass2 Registered Users Thread Starter Join Date: May 2006	I only have a 4OZ tank and get a little over 5 minutes. But you can add what ever size tank you like and get as much time as you would like. I run a little tank to keep it as light as possible.

Register Now

Log-in