Register Now

asianflava · 03-05-2007, 04:15 AM

I'm a NooB and this my first post here so I'm sorry for my ignorance.

I got my MX450 XS a couple weeks ago. I am slowly buying all the stuff I need to complete it. I took it out and started working on it and noticed that the main blades were too thin for the blade grips, the blades are .200in and the grip is .350in.

The parts diagram shows a washer but there is nothing left in the box. The way the arrows are in the diagram, it looks to be packaged with the blades. Is this part of the blade? or Part of the helicopter?

Is a call to Great Planes in my future?

Another question. What do you use to balance your blades? I initially used tracking tape but it seems to use a lot of tape. Is there a better way?

L0stS0ul · 03-05-2007, 09:39 AM

watch finless's video on blade balancing. (hopefully this link will work)

http://video.helifreak.com/?subpath=...lancing101.wmv

as far as the blade roots being to thin. where did you buy the kit from? did you buy it new? I've never had a set of mx-400 blades be to thin for the blade grips. Align blades will be though and will require shims to fit in the blade grips.

Scottlclem · 03-05-2007, 02:40 PM

I put my mx450 together last week. The plastic bag the blades were in had a small bag inside with the bolt nuts and washers inside . If you look close at this pic you can see the 4 washers that go on each side of the blades.
I guess they just let them out by mistake in your kit.

asianflava · 03-05-2007, 06:03 PM

Thanks!

Yeah the blades were in a bag like that. The bolts and nuts were in the small bag but no washers. I guess I'll call them tomorrow.

03-05-2007, 04:15 AM	#1 (permalink)
asianflava Registered Users Join Date: Feb 2007	Something missing? I'm a NooB and this my first post here so I'm sorry for my ignorance. I got my MX450 XS a couple weeks ago. I am slowly buying all the stuff I need to complete it. I took it out and started working on it and noticed that the main blades were too thin for the blade grips, the blades are .200in and the grip is .350in. The parts diagram shows a washer but there is nothing left in the box. The way the arrows are in the diagram, it looks to be packaged with the blades. Is this part of the blade? or Part of the helicopter? Is a call to Great Planes in my future? Another question. What do you use to balance your blades? I initially used tracking tape but it seems to use a lot of tape. Is there a better way?

03-05-2007, 02:40 PM	#3 (permalink)
Scottlclem Registered Users Join Date: Feb 2007	washers I put my mx450 together last week. The plastic bag the blades were in had a small bag inside with the bolt nuts and washers inside . If you look close at this pic you can see the 4 washers that go on each side of the blades. I guess they just let them out by mistake in your kit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-05-2007, 09:39 AM	#2 (permalink)
L0stS0ul Registered Users Join Date: Jul 2006	watch finless's video on blade balancing. (hopefully this link will work) http://video.helifreak.com/?subpath=...lancing101.wmv as far as the blade roots being to thin. where did you buy the kit from? did you buy it new? I've never had a set of mx-400 blades be to thin for the blade grips. Align blades will be though and will require shims to fit in the blade grips.

03-05-2007, 06:03 PM	#4 (permalink)
asianflava Registered Users Thread Starter Join Date: Feb 2007	Thanks! Yeah the blades were in a bag like that. The bolts and nuts were in the small bag but no washers. I guess I'll call them tomorrow.

Register Now

Log-in