Servo's Raptor 90 3d

[windshear]

What servos should I use? The 8717 are more money than I want to spend and maybe overkill since I am no professional.

[Badger50]

Align DS-610's and Futaba 9252's are both good choices. As are Hi-Techs and Ace. As long as your in the 130-200 torque range, they all will work fine for cyclic and pitch usage. You can almost use anything on the throttle. But I prefer a fast servo in the .6-.10 sec/60' range to keep up with the governor during hard 3D flying. Good luck to ya with whatever you choose :-)

[PhnX]

Get the alig ds610s without thinking. They make rap 90 sing heavy metal .

9252s are a little slow and since they cost same as Align ds610s, go for aligns.


For a little bit more money ace 1015s would be great choice. I heard they last longer than align ds610s. I have no other information to backup that theory tho.

For the throttle. I use a 3001 and its more than enough .

[windshear]

Thanks for the help!

I went with Hitec HS-7975HB and HS6635HB for throttle. I did not want to use metal gears since the gears will need to be replaced later. Put the first two flights on them today. They are great so far.

[Tomppa]

I have9252 in my r90 and i dont like them at all..Next one´s will be http://www.jrradios.com/Products/Tec...rodID=JRPS8717 little more money but lot´s of more fun

[schucb]

I was thinking of getting a new Hitec HS-7950th for my collective. It is a 400+ oz torque servo. Is that overkill?? I have a year or two old HS-5945mg which makes around 200 oz.

[sandhillflyer]

Im useing the hitec 7940th. may be to much of a serbo but their quick and still have more than enough torgue. If you dont mind spending the money for them i strongly recomemd them.

[Tristin]

So are there people actually using the 610’s on 90 heli’s. I recently purchased some 610’s and wanted to use them in me 50, but now i find myself looking for a 90 SE and thought I could use the 610’s as a starting servo. Will the 610 handle the loads of 3D flying?

[PhnX]

Originally Posted by Tristin

So are there people actually using the 610’s on 90 heli’s. I recently purchased some 610’s and wanted to use them in me 50, but now i find myself looking for a 90 SE and thought I could use the 610’s as a starting servo. Will the 610 handle the loads of 3D flying?

More than enough. Trust me 610s won't even slow down in a full pitch pump at all. They are monstorious.

[Funky]

Originally Posted by Tomppa

I have9252 in my r90 and i dont like them at all..Next one´s will be http://www.jrradios.com/Products/Tec...rodID=JRPS8717 little more money but lot´s of more fun

What don't you like about the 9252s? Have you had any problems with them in flight? Have you flown it with any other cyclic servos?

[FlyingHigh 450]

Align DS610's rock im my R90 .

[progunpilot85]

looks pretty good from here lon, i like my Futaba Bls451's in my 50, i also like getting more than 5 flights to a gallon...... ahhhh one day