Post Your Hurri 425 Pictures

[Epoweredrc]

Originally Posted by atkinson

Here is mine. Scorpion hk-3206-1400kv, cc ice 100, spartan quark, 810g tail servo, align 425d carbon fibers.

I would like to see the other side of this heli. to see where the wires are ran, I think thats where I am going to put my esc also.

[spootman]

Here's mine with a fresh canopy . 425 Basic kit, Hyperion DS-20 FMD's cyclic, Spartan 760 gyro, DS-20 GMD tail servo, Hacker A40 motor (1600kv) and a Castle Phoenix 60 with 10a BEC.

[Epoweredrc]

Originally Posted by spootman

Here's mine with a fresh canopy . 425 Basic kit, Hyperion DS-20 FMD's cyclic, Spartan 760 gyro, DS-20 GMD tail servo, Hacker A40 motor (1600kv) and a Castle Phoenix 60 with 10a BEC.

I really like that, Nice and Bright.

Mine is 425 basic kit it has Futaba 3004's Cyclic, Futaba 9253 tail with Logictech 2100T gyro, CC 100A ICE esc, and have not got a motor yet.

Ignore the other heli, these one pics I have with main blades on it I was comparing a old electric heli my dad still has to this one.
What Hacker A40 motor you got whats the - number? I do not see a 1600kv one.how do you like it? 1600Kv kinda high.

[spootman]

Thanks, it's the A40-10S V2. I got a good deal from the for sale forum. I'm still trying to set up the ESC for the motor, my Phoenix 60 doesn't seem to want to play nice with it. The KV is higher than I wanted to go but couldn't pass up the deal when I saw it. I have it geared to give me somewhere in the 2600ish range, so far so good.

[atkinson]

Originally Posted by Epoweredrc

I would like to see the other side of this heli. to see where the wires are ran, I think thats where I am going to put my esc also.

Nothin fancy

[Epoweredrc]

Thanks just was trying to see how you had your ESC wires ran.... I see there just ran on the outside of the front servo. i guess there so stiff they stay put... I would be worried them getting against the push pull rods. Just trying to get idea's how to do mine.

what is that under your gyro? looks green? some type of pad for the gyro to sit on?
is that needed?

[atkinson]

You're right; the wires are stiff enough that it will take some serious force to make them even come close to the servo. That green stuff is zeal tape. I believe koysho is the only one who makes it. It is a sticky gel like substance that is soft like silicone but will hold form when cut. A tad on the expensive side for some sticky tape. I had problems with the quark wagging bad. Started with the one piece of 1mm tape like on the finless vid. Added the metal plate and it helped but still didn't hold enough to satisfy me. Even with the raptor 30 tail blades. Put a little zeal tape on and presto....rock solid. Don't know if it is "necessary" though.

[Epoweredrc]

Originally Posted by atkinson

You're right; the wires are stiff enough that it will take some serious force to make them even come close to the servo. That green stuff is zeal tape. I believe koysho is the only one who makes it. It is a sticky gel like substance that is soft like silicone but will hold form when cut. A tad on the expensive side for some sticky tape. I had problems with the quark wagging bad. Started with the one piece of 1mm tape like on the finless vid. Added the metal plate and it helped but still didn't hold enough to satisfy me. Even with the raptor 30 tail blades. Put a little zeal tape on and presto....rock solid. Don't know if it is "necessary" though.

Thanks for the info

[coderzone77]

Originally Posted by spootman

Here's mine with a fresh canopy . 425 Basic kit, Hyperion DS-20 FMD's cyclic, Spartan 760 gyro, DS-20 GMD tail servo, Hacker A40 motor (1600kv) and a Castle Phoenix 60 with 10a BEC.

Wow,
nice work, I love that canopy painting

[PTcaflyer]

Here is some pics of my new 425

[Jerrymac]

I like the canopy. Nice and bright.

[kc76]

Hi guys, I'm newbie in Gaui family . I've made first hover and I can say 'It's amazing'. I'm waiting for a better weather. Below photo of my heli

[nexgen]

welcome to the Gaui family. this bird is GREAT! glad you are liking it.

[Brick]

Originally Posted by PTcaflyer

Here is some pics of my new 425

love the canopy man !!!!

[PTcaflyer]

...I was going for REALLY BRIGHT and it worked out...Little Avingale the Pappillon in the background, is averting her eyes due to the INTENSE brightness !
Dinsdale, my other dog is oblivious...he just wants to chase the ball...!
PT

[ownthesky2010]

Well here is my 425. Canopy is stock. Took around 2 hours to assemble and paint and its a very rough job. Not flown yet. Waiting on a pinion gear.

[chipbutty]

Nice job on the Protos looking colour scheme. I like it.

Originally Posted by ownthesky2010

Well here is my 425. Canopy is stock. Took around 2 hours to assemble and paint and its a very rough job. Not flown yet. Waiting on a pinion gear.

[ownthesky2010]

Thanks dude. Its easy to paint but effective.

[racer75]

Here is mine ..... with a TREX 500 Canopy


http://img841.imageshack.us/i/imag0037fr.jpg/





?h=roZnSMK4-zcm0ZaXaZt-2g" border="0" alt="" />

[fusionsx00]

Im finally done, man took forever. All I have left is tuning it, so taking the laptop with me for the next couple of weeks and flying a hour before work.