Setup

[Stig Pedersen]

Hey

I am considering the Frenzy 50 and would like to know wich servoes you have chosen for the swash plate. I would especially like to hear from thoose that have not choosen JR or align.

SP

[crashagain]

I am running BLS451's on mine..
9254 on the tail.

[99grandtouring]

I have align d610s on swash and a new mks bls980 for the tail I haven't tried out yet.

[Raptor30_V1]

Hello,

Relates to a Frenzy-90V2, but will do for a Frenzy-50 as well:

- swash plate servos: 3x Atlas Hyperion DS20x SMD (< USD 50.-)
- tail rudder servo: 1x MKS 980 (< USD 75.-)

I have the Atlas Hyperions and the MKS 980 in an other bird and they do an excellent job. Especially the tail rudder servo is the best tail servo I ever had and I will never ever again install any DS650 (SAVOX SH-1290) nor a S9254, nor a DS20x GMD nor a very expensive Futaba BLS as rudder servo ..

The Atlas Hyperion servos can be programmed, I don't know if this is even a must, as I bought the interface (USB).

How do the Atlas compared to the ALIGN/ SAVOX-servos (I have DS610 and 620 too) ? Well, I don't notice any difference and if bought oversea, the ALIGNs are only slightly more expensiv. The only dislike on the ALIGN/ SAVOX-servos are the noise the always make, even when not binding nor under real load ..

Best Regards,
Oliver

[wifeorheli?]

Sorry but i have choosen ds610. Competition servo for a good price

[crashagain]

Another good servo are these.. http://www.amainhobbies.com/product_...o-High-Voltage
I just put a set of these in my Velocity and they rock....